WAN Provisioning W52P on 3CX PBX

[Jensen_Yealink]

(03-01-2017 02:25 PM)reiddm Wrote:  

(03-01-2017 02:20 PM)Jensen Wrote:  Hi Reiddm,

You can Configure/assign an existing user's extension to cordless phone on the server side.
From i have known, during you config the extension on the server side, it will need to add the MAC to the server.
the detail please refer to below link:
https://www.3cx.com/sip-phones/yealink-dect-w52p/

if you want all the handsets share the same account, please refer to below admin guide, from page 87 to 92.
if you want all the handset with difference accounts, You can't auto provision the additional accounts but you can do it manually, that means you can manually add the account info to your provisioning cfg file, then provisioning the phone.
hope this help you.
thank you

Jensen, thank you for the information. Unfortunately, that article is specific to the 3CX v.15 phone system, and we're on version 12.

Dan

Hi Reiddm,

the provisioning process is similar to V15. I check the 3cx server on V11 that installed in our lab, the process is similar to V15, during you assign the extension to the phone, you can add the MAC. Please testing on your side, also you can contact 3CX team for help.
thank you.