[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WAN Provisioning W52P on 3CX PBX
Author Message
reiddm Offline
Junior Member
**

Posts: 3
Joined: Feb 2017
Reputation: 0
Post: #1
WAN Provisioning W52P on 3CX PBX
Greetings,

We are running a 3CX Phone System (version 12.0.37098.738 SP 6.1) at our Corporate office and have a remote office where we're deploying the W52P base station with a single cordless handset. This remote office uses WAN communications with the 3CX Phone System clients configured as remote extensions. Base station firmware is 25.80.0.15; hardware version is 25.1.0.0.0.0.0.

At the remote office, we have Yealink T42 & T46 handsets which use the 3CX Session Border Controller (SBC) running on a Windows 7 Pro PC. We also use the 3CX softphone for Windows, and these are configured for direct Internet access. We have been running this configuration for the past 3 years.

I was able to provision the base station by creating a new extension on the 3CX Phone System PBX and the base station is registered to the extension. I am not using the remote site SBC for connectivity back to the PBX; it is configured for direct Internet access. I was also able to register the cordless handset to the base station.

What I am not clear on is how to configure/assign an existing user's extension to the cordless handset. Plus, since the base station can handle up to 4 handsets, please advise on how to provision each handset so it will function with the remote extension assigned to it from the PBX.
02-27-2017 09:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
WAN Provisioning W52P on 3CX PBX - reiddm - 02-27-2017 09:22 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Is there no call history in web management panel in W52P? poznaniak 1 713 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 1,655 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL
  W52p Repair Aliaksandr 10 5,550 02-10-2020 10:30 PM
Last Post: RobertoDSM
  Action URI in W52P RRC_Support 1 1,546 10-22-2019 01:27 PM
Last Post: Garry_Yealink
  W52P Sporadic behavior with auto answer csmith@ccexpert.net 2 5,312 09-27-2019 08:38 PM
Last Post: justingoldberg
  W52P Dect Interface "Settings" is missing ? CHRIYEA 1 1,971 06-06-2019 08:58 AM
Last Post: complex1
  W52P - Detected as Router and Telephone SG300 LLDP jmtread 1 3,403 12-21-2018 12:27 AM
Last Post: jmtread
  W52P admin pass after recovery crodaxy 1 2,972 12-04-2018 10:16 AM
Last Post: complex1
  W52P Handset Registration Fail CSPL 2 3,785 11-28-2018 06:00 AM
Last Post: CSPL
  W52P SfB Fred_ofi 0 1,794 10-18-2018 02:07 PM
Last Post: Fred_ofi

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication