[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Display turns on everytime a blf blinks
Author Message
vela Offline
Junior Member
**

Posts: 5
Joined: Feb 2017
Reputation: 0
Post: #1
Display turns on everytime a blf blinks
Hi

I have a t27P running the latest firmware (T27-45.81.0.25).
Every time a colleague receives a call and BLFs starts blinking my screen turns on.
Is there a way to disable this?

Thanks
02-17-2017 07:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Display turns on everytime a blf blinks
Hi,

I guess maybe you enable the power saving feature.
Please try to disable it then test again.
You can make setting under path: web interface->settings->power saving.
02-21-2017 06:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
vela Offline
Junior Member
**

Posts: 5
Joined: Feb 2017
Reputation: 0
Post: #3
RE: Display turns on everytime a blf blinks
(02-21-2017 06:27 AM)Karl Wrote:  Hi,

I guess maybe you enable the power saving feature.
Please try to disable it then test again.
You can make setting under path: web interface->settings->power saving.

Hi Karl and thanks for the reply.
I tried disabling power saving but unfortunately it didn't solve my issue
02-21-2017 09:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: Display turns on everytime a blf blinks
(02-21-2017 09:38 AM)vela Wrote:  
(02-21-2017 06:27 AM)Karl Wrote:  Hi,

I guess maybe you enable the power saving feature.
Please try to disable it then test again.
You can make setting under path: web interface->settings->power saving.

Hi Karl and thanks for the reply.
I tried disabling power saving but unfortunately it didn't solve my issue

would you mind take a video to show the problem?
So we can know clearly the problem and give you assist.
02-21-2017 09:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
vela Offline
Junior Member
**

Posts: 5
Joined: Feb 2017
Reputation: 0
Post: #5
RE: Display turns on everytime a blf blinks
(02-21-2017 09:48 AM)Karl Wrote:  would you mind take a video to show the problem?
So we can know clearly the problem and give you assist.

Sure.

https://www.youtube.com/watch?v=6xzRS25Si3M

My extension is 219 and, as you can see in the video, when another extension on my blf list is called (and starts blinking) the backlight turns on
(This post was last modified: 02-21-2017 01:51 PM by vela.)
02-21-2017 01:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #6
RE: Display turns on everytime a blf blinks
(02-21-2017 01:50 PM)vela Wrote:  
(02-21-2017 09:48 AM)Karl Wrote:  would you mind take a video to show the problem?
So we can know clearly the problem and give you assist.

Sure.

https://www.youtube.com/watch?v=6xzRS25Si3M

My extension is 219 and, as you can see in the video, when another extension on my blf list is called (and starts blinking) the backlight turns on
Thank you.
I know the problem scenario, but I have to feel sorry that there is no way to configure.
02-23-2017 01:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dpoirier Offline
Junior Member
**

Posts: 3
Joined: Mar 2017
Reputation: 0
Post: #7
RE: Display turns on everytime a blf blinks
I have just begun experiencing the very same issue today. I upgraded the firmware on 2 T27P's from 45.80.0.130 to 45.81.0.25 and a T21P-E2 from 52.80.0.130 to 52.81.0.25.

This was not an issue in x.80.0.130. For every button programmed as a BLF, if the BLF assigned extension receives a call, the display on all sets with that extension configured as a BLF button is activated.

This will be especially annoying for our reception users, who will have upward of 50 BLF assigned buttons.
03-03-2017 10:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #8
RE: Display turns on everytime a blf blinks
May be this thread is able to solve the problem:

http://forum.yealink.com/forum/showthread.php?tid=40358
03-05-2017 08:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dpoirier Offline
Junior Member
**

Posts: 3
Joined: Mar 2017
Reputation: 0
Post: #9
RE: Display turns on everytime a blf blinks
(03-05-2017 08:37 PM)Werner1959 Wrote:  May be this thread is able to solve the problem:

http://forum.yealink.com/forum/showthread.php?tid=40358

This is not quite the same problem. The BLF button LED's are not all activating at the same time for us, only the display is activating and the single BLF button.
03-06-2017 04:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
vela Offline
Junior Member
**

Posts: 5
Joined: Feb 2017
Reputation: 0
Post: #10
RE: Display turns on everytime a blf blinks
(03-03-2017 10:08 PM)dpoirier Wrote:  I have just begun experiencing the very same issue today. I upgraded the firmware on 2 T27P's from 45.80.0.130 to 45.81.0.25 and a T21P-E2 from 52.80.0.130 to 52.81.0.25.

This was not an issue in x.80.0.130. For every button programmed as a BLF, if the BLF assigned extension receives a call, the display on all sets with that extension configured as a BLF button is activated.

This will be especially annoying for our reception users, who will have upward of 50 BLF assigned buttons.

i downgraded to .80.0.130. I'll stick with this version for now since this issue is very annoying
03-07-2017 10:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Display 0 for line pickup SupportA 0 1,101 07-12-2023 08:51 PM
Last Post: SupportA
  Picking up a call does not display Caller's Name oliv 0 1,296 04-19-2023 04:25 PM
Last Post: oliv
  Config T19P E2 to display a message while is talking vijareno 0 3,950 02-05-2020 07:37 AM
Last Post: vijareno
  Display Caller Picture on internal calls via LDAP dawgness 6 22,262 03-07-2019 01:41 AM
Last Post: scubes
  Disable full-screen display on T48S when other extensions are being called TStaudte 0 5,782 07-21-2017 05:08 AM
Last Post: TStaudte
  LDAP directory display name Cloud Communications 2 8,705 04-07-2017 07:44 AM
Last Post: Travis_Yealink
  T48G BLF triggers display brightness MaxHeu 4 11,128 10-25-2016 09:23 PM
Last Post: MaxHeu
  T20 visual forward on display perkins 1 6,116 05-21-2015 05:57 AM
Last Post: James_Yealink
  contact display size tigrnaz 5 14,082 06-18-2014 04:05 PM
Last Post: Yealink Support
  Display name of company Sileno 3 10,724 08-17-2013 02:15 PM
Last Post: CWR

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication