[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2 Base Stations - 8 Phones - individual phones randomly do not ring on incoming calls
Author Message
lilarry Offline
Junior Member
**

Posts: 5
Joined: Oct 2014
Reputation: 0
Post: #3
RE: 2 Base Stations-8 Phones-individual phones randomly do not ring on incoming calls
(02-10-2017 01:45 PM)complex1 Wrote:  
Quote:8 handsets on two base stations - all with separate SIP accounts - all on one inbound ring group.
How many handsets are registered to one base?

I know there where some questions in the past.
If there are more than 4 handsets registered to one base, randomly one of the handsets does not ring.
My guess is that your observation is probably correct given that the W56P will only support 4 simultaneous calls. I assume the base considers it a call when the INVITE comes in.

Hope this helps.

There are four handsets registered to each base. I am tending to agree that the 4 simultaneous call maximum may include SIP activity that a human may not necessarily consider a "call".

It would be good to have confirmation from Yealink on this. We have successfully deployed several of these DECT phones with one or two handsets registered to bases, but not 4 per base prior to this. It may be that while as many as 5 handsets can be registered, with as many as 4 simultaneous calls, having four handsets in the same ring group may not be workable. If so, Yealink needs to clarify the specs on these devices.

I am thinking the solution to this problem for this particular customer may be to add some more bases to this arrangement, so that no base has more than two handsets registered to it.

Thoughts?
02-10-2017 04:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 2 Base Stations-8 Phones-individual phones randomly do not ring on incoming calls - lilarry - 02-10-2017 04:34 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W56H handset with W52 base? poznaniak 3 5,089 03-03-2023 04:35 AM
Last Post: complex1
  W56P answering randomly DavidDDD 4 11,541 06-15-2022 12:33 PM
Last Post: expositor
  Unable to make calls - Path Busy - Yealink W60B/W56H JacoLange 3 10,254 11-20-2021 08:06 PM
Last Post: JacoLange
  Firmware for W56H and W52PW56P base Rajil 1 5,758 09-04-2021 04:06 AM
Last Post: complex1
  Multiple W56H's with One Base Station +FreePBX alankelly 2 8,671 05-04-2021 12:55 PM
Last Post: mlaihkw60b
Question W56H DECT handset randomly reset rj91013 1 8,615 12-01-2020 10:01 PM
Last Post: JohnJ
  W56H handset on a Gigaset DECT base station working? Frank@Meeet 2 11,799 09-09-2020 05:56 PM
Last Post: trushing@askonecall.com
  Base inaccessible and dead eroubal2@comcast.net 2 9,674 06-24-2019 03:56 AM
Last Post: eroubal2@comcast.net
  no dialtone or ringtone for w56p base and phones Marcbachman 3 12,785 06-19-2019 11:43 AM
Last Post: complex1
  How to read base data ? oliv 1 7,141 12-20-2018 08:07 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication