[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T48G - Feature Button - French Traduction
Author Message
MMi Offline
Junior Member
**

Posts: 2
Joined: Mar 2017
Reputation: 0
Post: #4
RE: Yealink T48G - Feature Button - French Traduction
Hello,

The problem is not limited to T48G; it is present at least also on T29G and T46G (I've version 28.81.0.60 on T46G and mistranslation still present).

I's a French translation problem, all other languages are ok; and it was ok on previous firmwares (at least on the "80" series).

While I'm at it, there are two translations in the French interface that are *VERY* misleading (and they are like that for as long as I remember, but if you fix Features -> "Fonctionnalités" then you could also fix those others too):

1. to activate/deactive a feature in English you see the _current_ status with adjectives: "activated"/"deactivated". However the French translation uses "activer"/"desactiver" whihc are _verbs_; that is very misleading because if you read "to activate" it's logical to think it is not yet activated ... So, activated/deactivated should be properly translated as "activé"/"désactivé"

2. the ON/OFF radio buttons are wrongly transalted as "sur"/"de"; "sur" means "on" like "on the table" Smile and "de" means "from".
Proper translation should be "activé"/"désactivé" (or, if space constraints limit to a few letters: "act."/"dés.")

3. And a third, bonus, request Smile on the main menu, in English there are two entries: "Basic" and "Advanced"; they are both translated as "Paramètres" (settings) in French. It would be better to keep "Paramètres" for basic settings, and "Avancé" for the advanced settings.

Thank you very much
03-30-2017 03:03 PM
Visit this user's website Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Yealink T48G - Feature Button - French Traduction - MMi - 03-30-2017 03:03 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T46U - OpenVPN to MikroTik Router isaiahsiewert 0 286 01-19-2024 12:04 AM
Last Post: isaiahsiewert
  Provision Button back to blank glennbtn 0 286 01-10-2024 06:34 PM
Last Post: glennbtn
  T48G/T49G on Ring Central? Gordon 2 9,092 12-27-2023 10:38 AM
Last Post: jseeley
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,650 11-16-2023 01:08 AM
Last Post: here4real
  Connect Yealink T46U to FreePBX system via Synology Site to Site VPN TF2023 0 647 10-10-2023 11:48 PM
Last Post: TF2023
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,077 07-27-2023 05:38 AM
Last Post: Lissvazquez
  Disable X button to reject calls hercross 0 686 07-07-2023 04:01 PM
Last Post: hercross
  T43U using L2TP VPN feature kaausc 0 700 06-22-2023 02:58 AM
Last Post: kaausc
  Yealink SIP-T40P Firmware UnitedTech_Support 1 1,841 05-05-2023 08:07 PM
Last Post: complex1
Question Yealink SIP-T31, 46U, 48U do not display the number of the called subscr Fedor.astrakhan 1 1,604 04-26-2023 10:05 PM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication