[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T29G Display ghosting
Author Message
Klaus_Yealink Offline
Super Moderator

Posts: 180
Joined: Jul 2015
Reputation: 0
Post: #2
RE: T29G Display ghosting
For the faulty units, please do as follows to see if we can eliminate the afterimage on screen:
A: Please power off the device for 2 hours.
B: Power it up, see if afterimage disappears. If yes, please upgrade firmware to xx.80.0.130 and enable screen saver and power saving features mentioned below.
C: If not, power off the device for longer (say 5 hours), repeat Step B.
D: If still no for C, please boot up the device. Press Menu key and go to different categories to change screen for about 10 timesPower off for 2 hours then power up.
E: If problem remains, please list all the MAC address of the faulty devices to us(support@yealink.com). We will take care.
For the units which does not appear to have such issue. We’d better apply the solutions to prevent them from the suffering the problem. Please help customer to upgrade all the devices to version: x.80.0.130. On this version, we have added three methods to fix this issue.
Method 1: power saving feature.
Simply speaking, you can configure your office hours. During the working hour, phone will not enter power saving mode. On off-work hours, phone will enter power saving mode after it has been idle for a certain period of time. All these durations can be configured through web interface and auto provision.
Please see release note of version x.80.0.125 and x.80.0.130 for configuration details.
Method 2: screen saver
This feature configures the phone to initiate screen saver when it is on idle for a certain period of time. Replacing screen with moving pictures or a blank screen. It can be configured through user interface, web interface and auto provision.
Please see release note of version x.80.0.125 for more configuration details.
Method3: force to shut the screen if no operation for 72 hours as final measure.
If there is no operation on phone for 72 hours, phone will shut up screen to protect the LCD. Press any key can wake the screen up. This is compulsory and not configurable. So it is not mentioned on release note.
We strongly suggest customers to upgrade the firmware to x.80.0.130 and enable the power saving and screen saver feature to protect the screen, especially when high-contrast picture is used. Please keep us posted about the progress of firmware upgrading and make sure customer has successfully configured screen saver and power saving feature
02-08-2017 10:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T29G Display ghosting - Chris708 - 02-07-2017, 04:59 PM
RE: T29G Display ghosting - Klaus_Yealink - 02-08-2017 10:27 AM
RE: T29G Display ghosting - Chris708 - 03-14-2017, 01:18 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T29G POE Requirement change? wonderboy1 1 1,475 04-22-2022 12:06 AM
Last Post: complex1
  T29G can't hang up call unless end call is pressed Bizfon 1 6,188 11-14-2019 07:51 AM
Last Post: Paz_Yealink
  Bug on XML Browser Image display Tercio 1 4,496 05-22-2019 02:54 AM
Last Post: Mike_Yealink
  T29G BLF Keys going dark rjhartman68 0 4,014 04-10-2019 02:59 PM
Last Post: rjhartman68
  BLF and Call Park on T29G pureit 0 4,384 04-02-2019 01:36 AM
Last Post: pureit
  T29G DTMF Duration mightychrisgill 1 5,023 02-04-2019 12:50 PM
Last Post: complex1
  T29G Remote Phonebook no lookup for incoming call Chris708 1 6,598 07-16-2018 03:15 PM
Last Post: Chris708
  T29G doesn't work Sam54 1 5,931 05-09-2018 02:04 AM
Last Post: Travis_Yealink
  T29G - Not Authorized to access the web interface shifa 2 9,922 05-04-2018 12:30 AM
Last Post: shifa
  T29G Registration failed Roshtech 1 5,468 01-29-2018 05:37 AM
Last Post: Evan_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication