[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[W52P+W56P] Same base station with with different handset models - Auto-provisioning
Author Message
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: Same base station with with different handset models - Auto-provisioning
Dear Sir,

Do you mean you want to upgrade the handset firmware of W52 and W56 in the same time, right?

In the wui, we can only upgrade W52H or W56H in one time. But we can use the parameter 'over_the_air.url' via auto provision to update the firmware at the same time. Please see the detail below:

1.upload the firmware of W52H and W56H, in my side,26.73.0.10 is for W52H,61.80.0.1 is for W56H

2.configure a cfg1 file, add this parameter in cfg1 file:
#!version:1.0.0.1

over_the_air.url = http://10.2.2.21:8099/26.73.0.10.rom

auto_provision.server.url = http://10.2.2.21:8099/cfg2.cfg


3.configure a cfg2 file, add this parameter in cfg2 file:
#!version:1.0.0.1

over_the_air.url = http://10.2.2.21:8099/61.80.0.1.rom

4. add the auto provision URL in server URL(in mt test, it is http://10.2.2.21:8099/cfg1.cfg) via web interface.
click on auto provision now, it will ask for the auto provision server, and download cfg1 file, upgrade W52H to 26.73.0.10, and it also ask for another provision server URL.

5.in this test,firstly,W52H will upgrade to 26.73.0.10, and base will obtain the second provision server URL after upgrading, and it will download cfg2 file, upgrade W56H to 61.80.0.1
then all is done. it may spend some time to upgrade. So we use a nested auto provision way to access it.

You can refer to the picture below:
   
   
01-17-2017 07:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Same base station with with different handset models - Auto-provisioning - Lucia_Yealink - 01-17-2017 07:01 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  w53H how to set up the hedset to reconect base with the best signal autoprimer 0 270 12-27-2021 02:36 PM
Last Post: autoprimer
  Deregister w56H without old base. digiaustin 1 2,749 08-01-2021 05:39 PM
Last Post: Phil2021
Tongue W52P Connectivity problems "out of range" or "synchronizing" gadget 5 14,144 12-11-2018 08:40 AM
Last Post: complex1
  T19P E2 auto provision firmware. NI 1 4,636 10-08-2018 05:15 PM
Last Post: NI
  Firmware upgrade with provisioning url(relative) arvind.zapp 10 20,367 05-12-2017 06:01 AM
Last Post: Asanka
  cannot disable auto provisioning W52P - W56H Babaloo71 5 11,539 02-21-2017 06:59 AM
Last Post: Karl_Yealink
  T29G v81 Provisioning w/ Encryption fastdevice 4 7,262 01-16-2017 12:09 PM
Last Post: Lucia_Yealink
Bug [W52P] SIP CANCEL with "Call completed elsewhere" shows missed call x0r 7 22,981 12-08-2016 08:00 AM
Last Post: smiso
  W52P headset capabilities jgreer 2 8,927 06-24-2016 02:25 AM
Last Post: gadget
  W52P Crashing (memory leak?) damo@launtel.net.au 7 14,544 05-31-2016 10:39 AM
Last Post: damo@launtel.net.au

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication