[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Phones always reboot when applying new config via provisioning
Author Message
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #4
RE: Phones always reboot when applying new config via provisioning
(12-15-2016 01:43 AM)avayax Wrote:  Is a "check-sync" enough?
Sangoma is saying that they had to set it up that way, otherwise Yealink phones would not take config correctly.
Did you change this recently?
Sangoma is saying: "That would be something new they added then as it always required a reboot before as things would not update correct like if you removed a button it would not remove it." http://community.freepbx.org/t/update-co...ot/38507/5

Not sure what firmware or phones the FreePBX guys were testing with (or when), but in my experience that hasn't been the case since... at least 4 years ago? Firmware V.70 introduced the ability for provisioning to take effect without causing a reboot for most things (the exceptions were noted by Peter above), never had a problem with a button failing to update...

For completeness I should mention that we don't use the FPBX EPM as it was a broken bloated ugly mess back when we first started doing our Yealink stuff, so we built our own provision handling system, but that should have no impact on how the resync actually works/is triggered.

The notify message we use is "check-sync; reboot=false"
12-15-2016 01:55 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Phones always reboot when applying new config via provisioning - jolouis - 12-15-2016 01:55 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Phones no longer support Let Encrypt johnbeaumont 20 31,350 01-19-2024 08:09 AM
Last Post: tom-nbb
  Firmware phones T33G esoriano 1 886 12-13-2023 02:50 AM
Last Post: complex1
  MP54 Teams phones sometimes fail to log in jzcase 0 672 11-21-2023 12:26 AM
Last Post: jzcase
  Phones without a "server/PBX" kermitxyz 0 655 11-13-2023 02:26 AM
Last Post: kermitxyz
  Import xml contacts to Yealink Phone upon provisioning via TFTP vusald 1 2,381 02-18-2023 06:30 PM
Last Post: complex1
  Reboot Required After Name Change T54W awilson@intermaxteam.com 1 1,853 02-09-2023 11:48 PM
Last Post: awilson@intermaxteam.com
  Do Yealink IP Phones Support ZRTP? nolto 0 1,346 01-15-2023 11:35 PM
Last Post: nolto
  integrate Salesforce CRM to Yealink phones mehdi.ett 3 11,700 12-21-2022 02:20 PM
Last Post: Arun Kiran
  Provisioning lines in positions on 2nd page of display bruceg 0 1,273 10-01-2022 04:24 PM
Last Post: bruceg
  MP50 Phones not dialling az@a2z-computing.com 7 8,450 09-23-2022 09:35 PM
Last Post: Oksania

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication