[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Strange BLF LED behaviour since Firmware upgrade
Author Message
badmin Offline
Junior Member
**

Posts: 8
Joined: Oct 2015
Reputation: 0
Post: #8
RE: Strange BLF LED behaviour since Firmware upgrade
I chose to export All-Settings-CFG on my T46G and was able to add the line from Lucias config file (thank you!). But this will only disable the wake up of the display when there is a call on another phone that is registered to my BLF function.

The main problem - all LEDs are flashing red if one of the configured phones receives a call - is still there. It wasn't there, however, on earlier firmware versions.

For example - if I flash version T27-45.80.0.95 on my T27p then the proper BLF is flashing when the other phone receives an incoming call. Going back to the latest firmware shows the explained problem, that all BLF LEDs are flashing if ONE configured phone receives a call.

(12-05-2016 12:32 PM)Lucia Wrote:  Hi Sir,

About your problem, please use the parameter below to do auto provision:

features.blf_active_backlight.enable=0
##It enables or disables the IP phone to turn on the backlight or stop the screen saver when the BLF/BLF list status changes.
#0-Disabled
#1-Enabled

If the problem still exist, then please provide the level 6 syslog, config.bin and pace trace when reproduce the issue to analyze.

About how to get the three files, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=313

Also, how many phones you have in total?

Best Regards,
Lucia

I just traced it and attached is the log file from my T46G, currently running 28.81.0.20.

I have 1 x T46G and around 10-15 x T27P in our office.

I have 7 BLFs configured, all of them use the phone T27P. I am the only one with a T46G. Only phones with the recent firmware have the problem.


Attached File(s)
.tar  allconfig.tar (Size: 440 KB / Downloads: 5)
(This post was last modified: 12-08-2016 01:38 PM by badmin.)
12-08-2016 12:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Strange BLF LED behaviour since Firmware upgrade - badmin - 12-08-2016 12:48 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Release phone from Zoom to upgrade firmware jamesmknox 0 1,047 05-13-2024 02:41 AM
Last Post: jamesmknox
  T31G Firmware Resetting Cycling medusanyc 1 3,798 09-24-2022 10:26 PM
Last Post: complex1
  Auto firmware upgrade Kala 2 10,309 05-21-2018 03:50 PM
Last Post: Kala
  Yealink T20P phones with Fonality firmware Quan7 0 5,749 10-04-2017 10:00 PM
Last Post: Quan7
  Firmware versions toj345 1 7,959 01-26-2016 04:06 AM
Last Post: Klaus_Yealink
  CNG fails on latest T2x firmware neurosys 3 13,062 09-09-2015 03:07 AM
Last Post: neurosys
  Speed Dial behaviour and the the transfer.dsskey_deal_type parameter RobertS 2 12,976 01-27-2015 05:10 PM
Last Post: James_Yealink
  Yealink T28p no longer working after CudaTel firmware update AshElsayid 1 10,108 01-20-2015 08:52 PM
Last Post: James_Yealink
  W52P Handset Firmware Upgrade trilan_steveg 1 9,821 08-08-2014 02:29 AM
Last Post: complex1
  Firmware Update for EHS36 gobenb 7 27,600 05-30-2014 11:04 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication