New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Local DHCP doesnt work when OpenVPN is enabled
Author Message
davids@btni.co.uk Offline
Junior Member
**

Posts: 1
Joined: Jun 2015
Reputation: 0
Post: #1
Local DHCP doesnt work when OpenVPN is enabled
Hi,
I have managed to get the OpenVPN connection working from my Yealink T28 to FreePBX OpenVPN, however this was using a static IP address on the phone. As soon as I turn it to DHCP the phone just sits on obtaining IP address.

We need them to be configured to use DHCP so that normal users can take the phones home and plug into the home networks, no matter what way their home networks are configured.

Ideally it should get a local IP address first, and then dial the VPN and get its tunnel address and finally find the PBX.

As soon as I give the phone a static IP address it connects to the VPN and registers against FreePBX.

If I turn off VPN it will pick up a dhcp address straight away (after it reboots) so I know my dhcp server is ok.

Some specs
T28P
Firmware 2.73.0.50
Windows 2012R2 DHCP - no VLAN - 192.168.xx.xx network
OpenVPN network - 10.0.8.xx
I have tried the phone through two different PoE switches, cisco and netgear.

I will gather up some logs and post then here shortly, but thought I would put the question out in case someone has came across this issue before.
Thanks
David

Update - No logs are recorded on the windows server, and as the phone gets rebooted before I can connect to it, its logs don't show anything before the reboot. Correct me if i'm wrong or if you know how I can see the logs of it failing to get a dhcp address?
Thanks
(This post was last modified: 06-23-2015 07:24 AM by davids@btni.co.uk.)
06-23-2015 07:08 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Local DHCP doesnt work when OpenVPN is enabled - davids@btni.co.uk - 06-23-2015 07:08 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  BLF no work in Unify OpenScape Business marioruiz_2811 4 1,514 05-22-2019 02:52 PM
Last Post: turiatel
  OpenVPN and QoS/TOS roelvanmeer 0 447 02-19-2019 09:27 AM
Last Post: roelvanmeer
  OpenVPN Timeout connecting p2xt 3 1,545 07-13-2018 07:37 PM
Last Post: jolouis
  cannot get forwarding to work p2xt 2 1,783 11-07-2017 10:54 AM
Last Post: p2xt
  openvpn w52p setup rafael 4 6,969 08-10-2017 02:03 PM
Last Post: indicato
  VPN Offline allow phone to work Clair 1 1,810 08-04-2017 09:31 PM
Last Post: jolouis
  can't setup openvpn with t48g zzz 8 7,829 07-18-2017 09:04 AM
Last Post: sj
  T42G dhcp issue Neway 1 2,190 06-15-2017 03:01 AM
Last Post: Karl_Yealink
  T46G Hostname not registering on DHCP fraukas 2 5,157 10-27-2016 12:34 AM
Last Post: fraukas
  Action URL does not work danield 1 2,871 10-01-2016 12:57 AM
Last Post: Kevin_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication