[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P auto provision
Author Message
ECN Offline
Junior Member
**

Posts: 3
Joined: May 2015
Reputation: 1
Post: #1
W52P auto provision
Hi,

I'm using the W52P cordless phone with option 66 pointing to the host-name of an internal TFTP server. The W52P is able to download its common configuration file but fails to download the mac.cfg file. The phones logs indicate the following error:

Quote:Jun 13 03:26:57 LIBD[345]: TFTP<5+notice> tftp open begin, host: -host name removed-, port:69, remote_name:001565858fe9.cfg
Jun 13 03:26:57 LIBD[345]: TFTP<6+info > Send Request Packet
Jun 13 03:26:57 LIBD[345]: TFTP<5+notice> tftp open success
Jun 13 03:27:02 LIBD[345]: TFTP<3+error > Error Select! errno 0
Jun 13 03:27:02 ATP [345]: ATP <3+error > tftp to file failed, code = -8, msg = Read Error, retry = 3
Jun 13 03:27:02 ATP [345]: ATP <4+warnin> Download mac.cfg fail
Jun 13 03:27:02 ATP [345]: ATP <6+info > send end provision!!

I've tried renaming the mac.cfg file that is currently on my tftp server to match what the phone is looking for - 001565858fe9.cfg - but this hasn't resolved the issue. I've stripped the config in the mac.cfg file to the bare basics in an attempt to make troubleshooting easier:

Quote:#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted.##

################################################################################​#######
## Account1 Settings ##
################################################################################​#######

#Enable or disable the account 1; 0-Disabled (default), 1-Enabled;
account.1.enable = 1

#Configure the label displayed on the LCD screen for account 1.
account.1.label = 101

#Configure the display name of account 1.
account.1.display_name = 101

#Configure the username and password for register authentication.
account.1.auth_name = 101
account.1.password = -removed-

#Configure the register user name.
account.1.user_name = 101

#Configure the SIP server address.
account.1.sip_server_host = -removed-

#Specify the IP address or domain name of the outbound proxy server.
account.1.outbound_host = -removed-

#Specify the port for the SIP server. The default value is 5060.
account.1.sip_server_port = 5060

#Specify the server port, the default value is 5060.
account.1.outbound_port = 5060

#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if}
{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if}
{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if}
{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if}

#Configure the SIP port for account 1, the default value is 5060.
account.1.sip_listen_port = 5060

#Configure the register expiry time (in seconds), the default value is 3600.
account.1.expires = 3600

#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
account.1.ptime = 20

The handset and base station are using out of the box firmware. Absolutely no upgrades have been done at this point in time to either.


My question here is why does the W52P fail to download the mac.cfg file?
06-13-2015 12:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
W52P auto provision - ECN - 06-13-2015 12:00 PM
RE: W52P auto provision - ECN - 06-16-2015, 02:18 PM
RE: W52P auto provision - Elaine_Yealink - 06-16-2015, 05:34 PM
RE: W52P auto provision - ECN - 06-17-2015, 01:27 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ISRG Root X1 cert not recognized by phone during auto provision chrisduncansb 2 1,958 05-21-2024 01:23 PM
Last Post: rlaager
  Auto Provision Wall Paper Stopped Working TRP Tech 5 12,277 02-19-2024 12:02 AM
Last Post: jamesalan
  W52P handset language mkeuter 2 8,861 01-04-2024 08:52 PM
Last Post: bartas
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 0 3,007 10-12-2023 05:49 PM
Last Post: Andi_Dee
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 3,043 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 4,832 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 7,910 04-12-2023 05:32 PM
Last Post: aaronmedina
  Yealink T54W Auto Provision not working h.cmc 1 5,525 12-09-2022 08:31 PM
Last Post: complex1
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 7,162 08-30-2022 06:28 PM
Last Post: complex1
  Auto provision username and password kbrownlees 7 25,782 08-23-2022 11:16 PM
Last Post: mbole

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication