[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Loud Hum on T46 Handsets
Author Message
Frank Drews Offline
Member
***

Posts: 63
Joined: Jan 2014
Reputation: 0
Post: #4
RE: Loud Hum on T46 Handsets
(06-12-2015 02:46 AM)Yealink_Elaine Wrote:  Dear,

As far as I know, we don't have such accident. May I know more about the loud hum issue:
1. Is it happens on call or just list the handset?
2. If replaced with a new handset, will the hum gone?
3. Have you tried to upgrade the firmware to the latest?

Regards
Elaine

1. Even, if no call is etstablished, and the phone is just making the "line ready" sound. During calls, too. But there seems to be no hum, if there is no sound at all, but I am not 100% sure about it.
2. Yes, with a new handset the hum goes away
3. At the moment we are using V73. Upgrading to V73 didn't change things

(06-12-2015 01:57 AM)natesecd Wrote:  We have been frequently needing to replace the handsets on the T46 phones because of a loud hum that has crept up. This was with our first batch of phones that we initially installed back in November of 2013. Was there a known bad batch of phones during that time?

We are having the same issue. We purchased our phones in November/December 2013.
We had issues with 20 handsets out of 200 active phones since. Sometimes replacing the cable or adding an non-twister adapter would fix the issue, 7 times we replaces the handset. The non-twister adapter are a little wider than the cable plugs and so they don't wiggle. We aquired two different batches, but we didn't collect any data on which phones were affected. And people here don't use their telephone very much, we have no call centre or sales department.

We disassembled the handsets and there seems to be an issue, that the female plug to insert to cable is to wide. The plug has lots of free space to wiggle. I am not an expert on plugs at all, it's more a guess, that this is the root cause for our issues.
Youtube Video showing wiggeling (non-listed)

We are thinking about glueing the plug to the handsets.

The thing is, that people often try different things and suffer bad sound quality for month, before they reach us. So we want to provide a proactive solution.

Any similar experiences?

Best regards Frank
(This post was last modified: 01-29-2016 06:39 PM by Frank Drews.)
01-29-2016 06:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Loud Hum on T46 Handsets - natesecd - 06-12-2015, 01:57 AM
RE: Loud Hum on T46 Handsets - natesecd - 06-13-2015, 05:05 AM
RE: Loud Hum on T46 Handsets - Frank Drews - 01-29-2016 06:29 PM
RE: Loud Hum on T46 Handsets - Frank Drews - 01-29-2016, 07:37 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ringer Loud on Yealink T46S when using WH62 Dual Headset KellyL@AlternateAccess.com 0 2,199 07-07-2022 05:06 AM
Last Post: KellyL@AlternateAccess.com
  Ringer too loud when headset attached ability_cn 0 3,665 11-12-2021 06:01 PM
Last Post: ability_cn
  Yealink T46S Handsets Sending Static Buffering Sound IPPBX 1 6,493 10-19-2019 10:22 AM
Last Post: complex1
  Attended Transfer Issues with T46G Handsets MakoNet 3 12,238 05-04-2017 06:03 AM
Last Post: Kevin_Yealink
  Plantronics Savi 740 w/T46G Outgoing Gain Too Loud Renusa-Bryan 3 9,130 02-02-2016 03:51 AM
Last Post: Bryan
  T46G volume very loud mwoffenden 4 12,001 04-28-2015 01:12 AM
Last Post: rkimber

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication