[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTP port conflict
Author Message
alexnm Offline
Junior Member

Posts: 3
Joined: Jun 2015
Reputation: 0
Post: #1
RTP port conflict

I have a W52P ( with 4 handsets each with its own SIP account (all on 3CX Phone System 12). It's configured with min RTP port 14060 and max RTP port 14069.

And I faced the following problem – let's say one person is having a long conversation on handset 1. This call uses 14060 port. During this call another person makes many short calls on the 2nd handset. And on every of these calls next RTP port is used (14062, next 14064, then 14066, 14068). And finally the next call attempt takes 14060 which is in use already! And a person on handset 2 hears a conversation going on handset 1. It's important that there is no more than 2 concurrent calls at any moment, so free RTP ports are available.

I'm going to try to increase rtp range, but it will not solve this problem completely, just make it more rare.

Does somebody have the same problem? Any advices?

06-10-2015 03:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RTP port conflict - alexnm - 06-10-2015 03:56 PM
RE: RTP port conflict - Flora_Yealink - 06-11-2015, 01:48 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Headset port and stereo headset _alx_ 2 10,561 12-10-2015 06:04 PM
Last Post: _alx_

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication