blind_oracle
Junior Member
Posts: 4
Joined: May 2015
|
802.1x with certificates - problems
I've got a lot of Yealink phones (T22, T28 etc), Cisco Catalyst 2960-S switches and Cisco ISE as an authentication server.
And i'm trying to do 802.1x auth with the phones.
EAP-MD5 works fine, but i'm trying to make EAP-TLS/PEAP work.
I've uploaded the certificates (client, CA) to the test phone, ISE server's certificate was issued by the same CA:
Code:
network.802_1x.mode = 3
network.802_1x.identity = dot1x-client
network.802_1x.md5_password = xxx
network.802_1x.root_cert_url = http://voip.domain.ru/yealink/tls/ca-linux-2048.domain.ru.pem
network.802_1x.client_cert_url = http://voip.domain.ru/yealink/tls/dot1x-client.pem
If i enable 802.1x on port while the phone is online, it authenticates successfully and works fine. EAP-PEAP/EAP-TLS both work.
But if i reboot the phone, when it boots up again it cannot authenticate to the ISE any more:
Code:
12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
If i disable 802.1x on port and re-enable it afterwards - it authenticates and works fine again.
I'm testing on T22P with latest FW 7.73.0.50, tried earlier versions too, same shit.
Glad to have any help.
ISE Log:
Code:
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
11049 Settings of RADIUS default network device will be used
15049 Evaluating Policy Group
15008 Evaluating Service Selection Policy
15048 Queried PIP - Radius.Service-Type
15048 Queried PIP - Radius.NAS-Port-Type
15048 Queried PIP - Radius.NAS-IP-Address
15004 Matched rule - Wired Dot1x
11507 Extracted EAP-Response/Identity
12300 Prepared EAP-Request proposing PEAP with challenge
12625 Valid EAP-Key-Name attribute received
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
11049 Settings of RADIUS default network device will be used
12302 Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
12319 Successfully negotiated PEAP version 1
12800 Extracted first TLS record; TLS handshake started
12805 Extracted TLS ClientHello message
12806 Prepared TLS ServerHello message
12807 Prepared TLS Certificate message
12810 Prepared TLS ServerDone message
12305 Prepared EAP-Request with another PEAP challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
11049 Settings of RADIUS default network device will be used
12304 Extracted EAP-Response containing PEAP challenge-response
12305 Prepared EAP-Request with another PEAP challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
11049 Settings of RADIUS default network device will be used
12304 Extracted EAP-Response containing PEAP challenge-response
12305 Prepared EAP-Request with another PEAP challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
11049 Settings of RADIUS default network device will be used
12304 Extracted EAP-Response containing PEAP challenge-response
12319 Successfully negotiated PEAP version 1
12815 Extracted TLS Alert message
12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
12307 PEAP authentication failed
11504 Prepared EAP-Failure
11003 Returned RADIUS Access-Reject
Phone's syslog:
Code:
Nov 10 00:00:00 syslogd started: BusyBox v1.10.3
Nov 10 00:00:01 RTSR[246]: ANY <0+emerg > RTSR log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Nov 10 00:00:01 RTSR[246]: ANY <0+emerg > ANY =5
Nov 10 00:00:01 RTSR[246]: ANY <0+emerg > RTSR log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Nov 10 00:00:01 RTSR[246]: ANY <0+emerg > ANY =3
May 21 00:00:05 Log [274]: ANY <0+emerg > Log log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:05 Log [274]: ANY <0+emerg > ANY =5
May 21 00:00:05 Log [274]: ANY <0+emerg > Log log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:05 Log [274]: ANY <0+emerg > ANY =3
May 21 00:00:08 AUTP[346]: ANY <0+emerg > AUTP log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:08 AUTP[346]: ANY <0+emerg > ANY =3
May 21 00:00:08 AUTP[346]: AUTP<3+error > File Check Fail!
May 21 00:00:09 LLDP[352]: ANY <0+emerg > LLDP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:09 LLDP[352]: ANY <0+emerg > ANY =5
May 21 00:00:10 LLDP[352]: ANY <0+emerg > ANY =3
May 21 00:00:10 inetd[374]: /etc/inetd.conf: No such file or directory
May 21 00:00:12 SIP [372]: ANY <0+emerg > SIP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:12 SIP [372]: ANY <0+emerg > ANY =5
May 21 00:00:12 SIP [372]: ANY <0+emerg > [SIP] UA Build:[ (May 5 2014,08:12:27)-Release] Version:[ 7.3.0.6 ]
May 21 00:00:12 SIP [372]: SIP <5+notice> [SIP] sip phone type is:0
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.116.973:IPP log :sys=1,cons=0,time=1,sock=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.122.723:Version :12.1.90.0 for release (libsrtp)
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.124.102:Built-at:Jun 2 2014,20:45:45. Using svn id NULL
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.125.376:Logmode :0x00000005
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.126.590:setting :memcheck=0,assert=0
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.127.819:ANY =4
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.130.178:ANY =5
May 21 00:00:13 IPP[395]: ANY <0+emerg >413.132.200:HW Ver :5.0.0.61
May 21 00:00:15 TR9 [398]: ANY <0+emerg > TR9 log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:15 TR9 [398]: ANY <0+emerg > ANY =5
May 21 00:00:15 TR9 [398]: ANY <0+emerg > ANY =3
May 21 00:00:15 IPP[395]: IPP <5+notice>415.367.689:PROF t22 v2
May 21 00:00:15 AUTP[401]: AUTP<3+error > Get Local IP fail
May 21 00:00:15 LIBD[346]: DANY<0+emerg > LIBD log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:15 LIBD[346]: DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:16 LIBD[346]: DANY<0+emerg > DANY=3
May 21 00:00:16 IPP[395]: IPP <4+warnin>416.575.163:unkown msg,00008001,00000000,00000000
May 21 00:00:17 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:17 LIBD[397]: DANY<0+emerg > LIBD log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:17 IPP[395]: IPP <5+notice>417.912.433:OPEN_HEADSET_MODE:00000001 00000000
May 21 00:00:17 IPP[395]: IPP <5+notice>417.917.320:SET_VOLUNE:00000001 00000000
May 21 00:00:17 IPP[395]: IPP <5+notice>417.918.870:PLAY_LOCAL_DTMF:00000000 00000001
May 21 00:00:17 IPP[395]: IPP <5+notice>417.920.377:OPEN_HANDSET_MODE:00000001 00000000
May 21 00:00:17 IPP[395]: IPP <5+notice>417.924.857:OPEN_HANDFREE_MODE:00000001 00000000
May 21 00:00:18 IPP[395]: IPP <5+notice>418.014.563:SET_VOLUNE:00000001 0000000e
May 21 00:00:18 IPP[395]: IPP <5+notice>418.016.397:TALK_START:fffffffe 00000000
May 21 00:00:18 IPP[395]: IPP <5+notice>418.052.759:OPEN_HANDSET_MODE:00000001 00000000
May 21 00:00:18 IPP[395]: IPP <5+notice>418.055.527:SET_VOLUNE:00000001 0000000f
May 21 00:00:18 LIBD[257]: DANY<0+emerg > LIBD log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:18 LIBD[257]: DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:18 LIBD[257]: DANY<0+emerg > DANY=6
May 21 00:00:18 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:18 LIBD[257]: DCMN<6+info > OK
May 21 00:00:18 LIBD[257]: DCMN<6+info > verify advance
May 21 00:00:19 LIBD[257]: DCMN<6+info > client cert
May 21 00:00:19 RTSR[257]: RTSR<3+error > com name yealinkgeneric
May 21 00:00:19 RTSR[257]: RTSR<3+error > Not the factory firmware!
May 21 00:00:19 RTSR[257]: RTSR<3+error > handle failed
May 21 00:00:19 IPP[395]: IPP <4+warnin>419.145.487:unkown msg,00002001,00000000,00000000
May 21 00:00:20 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:21 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:21 RTSR[432]: ANY <0+emerg > RTSR log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:21 RTSR[432]: ANY <0+emerg > ANY =5
May 21 00:00:21 RTSR[432]: ANY <0+emerg > RTSR log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:21 RTSR[432]: ANY <0+emerg > ANY =3
May 21 00:00:23 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:24 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:26 LDAP[397]: ANY <0+emerg > LDAP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:26 LDAP[397]: ANY <0+emerg > ANY =3
May 21 00:00:26 LDAP[397]: ANY <0+emerg > MEM =3
May 21 00:00:26 LDAP[397]: ANY <0+emerg > LDAP=3
May 21 00:00:26 LDAP[397]: LDAP<3+error > Init config! libldap Ver:3.0.1.7
May 21 00:00:26 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:27 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:29 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:30 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:31 RTSR[435]: ANY <0+emerg > RTSR log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:31 RTSR[435]: ANY <0+emerg > ANY =5
May 21 00:00:31 RTSR[435]: ANY <0+emerg > RTSR log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:00:31 RTSR[435]: ANY <0+emerg > ANY =3
May 21 00:00:32 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:33 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:34 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:35 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:36 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:38 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:39 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:40 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:41 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:42 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:43 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:44 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:45 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:46 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:47 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:48 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:49 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:50 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:51 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:52 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:53 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:54 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:55 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:56 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:57 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:58 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:00:59 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:00 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:01 RTSR[500]: ANY <0+emerg > RTSR log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:01:01 RTSR[500]: ANY <0+emerg > ANY =5
May 21 00:01:01 RTSR[500]: ANY <0+emerg > RTSR log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:01:01 RTSR[500]: ANY <0+emerg > ANY =3
May 21 00:01:01 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:02 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:03 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:04 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:05 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:06 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:07 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:08 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:09 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:10 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:12 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:13 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:14 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:15 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:16 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:17 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:18 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:19 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:20 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:21 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:22 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:23 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:24 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:25 RTSR[502]: ANY <0+emerg > RTSR log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:01:25 RTSR[502]: ANY <0+emerg > ANY =5
May 21 00:01:25 RTSR[502]: ANY <0+emerg > RTSR log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
May 21 00:01:25 RTSR[502]: ANY <0+emerg > ANY =3
May 21 00:01:25 AUTP[346]: AUTP<3+error > network isn't complete, sleep 1s!
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.495.523:unkown msg,00002002,00000000,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.516.322:unkown msg,00010005,00000000,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.614.697:unkown msg,00010005,00000000,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.713.597:unkown msg,00010010,030b010a,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.823.882:unkown msg,00010100,00000000,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.828.554:unkown msg,00002008,00000000,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.854.183:unkown msg,00002007,00000000,00000000
May 21 00:01:25 IPP[395]: IPP <4+warnin>485.911.940:unkown msg,00002007,00000000,00000000
May 21 00:01:26 SIP [372]: SIP <5+notice> [SIP] ** Load phone context **
May 21 00:01:27 LIBD[346]: DANY<0+emerg > DANY=3
May 21 00:01:28 LIBD[346]: DCMN<3+error > the ca file file has existed in custom certs directory
May 21 00:01:28 AUTP[346]: AUTP<3+error > Upgrade Fial
May 21 00:01:29 syslog: web_upd.cpp(2750): pcHwVer=5.0.0.61
May 21 00:01:29 syslog: web_upd.cpp(971): mtd6 ver from update.cfg:7.72.14.6.-1.-1
May 21 00:01:29 syslog: web_upd.cpp(2815): nWebUpdHeadLen=29, nWebUpdSubHeadLen=11
May 21 00:01:29 syslog: web_upd.cpp(1807): firmware sw_protect=0, swver[2]:14--14
May 21 00:01:29 syslog: ^[[1;31mweb_err.cpp(33): Errcode=0x11ff, desc:partion 6 does not need update ^[[0m
May 21 00:01:29 AUTP[346]: AUTP<3+error > Invalid rom header!
May 21 00:01:29 AUTP[346]: AUTP<3+error > errCode = 4607, errDesc = partion 6 does not need update
May 21 00:01:29 SIP [372]: SIP <5+notice> [SIP] ** Load OK **
May 21 00:01:29 SIP [372]: ANY <0+emerg > ANY =3
May 21 00:01:30 IPP[395]: IPP <4+warnin>490.284.473:unkown msg,000b0007,00000001,00000000
May 21 11:05:10 IPP[395]: IPP <4+warnin>310.633.772:unkown msg,00002006,00000000,00000000
May 21 11:05:10 IPP[395]: IPP <4+warnin>310.671.719:unkown msg,00002007,00000000,00000000
May 21 11:05:13 IPP[395]: IPP <4+warnin>313.700.166:unkown msg,00010006,00000000,00000001
May 21 11:05:14 IPP[395]: IPP <4+warnin>314.960.976:unkown msg,00010006,00000000,00000002
May 21 11:05:18 Log [335]: ANY <0+emerg > Log log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
May 21 11:05:18 Log [335]: ANY <0+emerg > ANY =3
esw0 Link encap:Ethernet HWaddr 00:15:65:4E:24:91
inet addr:10.1.11.3 Bcast:10.255.255.255 Mask:255.255.254.0
inet6 addr: fe80::215:65ff:fe4e:2491/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:483 errors:0 dropped:0 overruns:0 frame:0
TX packets:441 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:265631 (259.4 KiB) TX bytes:189439 (184.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
PID USER VSZ STAT COMMAND
1 root 2808 S init
2 root 0 SW [ksoftirqd/0]
3 root 0 SW< [desched/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
10 root 0 SW< [kthread]
13 root 0 SW< [kblockd/0]
39 root 0 SW [pdflush]
40 root 0 SW [pdflush]
42 root 0 SW< [aio/0]
41 root 0 SW [kswapd0]
48 root 0 SW [kseriod]
60 root 0 SW [mtdblockd]
88 root 0 SW< [IRQ 8]
91 root 0 SW< [IRQ 15]
120 root 0 SW< [kmkit]
141 root 0 SWN [jffs2_gcd_mtd4]
211 root 2808 S init
233 root 0 SW< [IRQ 35]
236 root 2808 S /bin/sh /yealink/scripts/Net.sh
238 root 7340 S /yealink/bin/configServer.exx
246 root 10532 S /yealink/bin/rtServer.exx
253 root 2268 S /sbin/syslogd -S -O /tmp/Messages -s 200 -b1
256 root 10532 S /yealink/bin/rtServer.exx
257 root 10532 S /yealink/bin/rtServer.exx
258 root 10532 S /yealink/bin/rtServer.exx
264 root 2808 S /bin/sh /yealink/scripts/ScreenApp.sh
274 root 18104 S /yealink/bin/Screen.exe
326 root 9004 S /yealink/bin/dot1x.exe -B -i esw0 -c /yealink/config/
330 root 6044 S ./sbin/lighttpd -f /yealink/bin/lighttpd/config/light
335 root 12176 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
342 root 2808 S /bin/sh /yealink/scripts/SipApp.sh
343 root 2808 S /bin/sh /yealink/scripts/VpmApp.sh
344 root 8108 S /yealink/bin/pcap.exx
346 root 11924 S /yealink/bin/autop.exe
338 root 6888 S /yealink/bin/lldpd &
363 root 12176 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
364 root 12176 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
352 root 7400 S /yealink/bin/lldpd &
370 root 0 SW< [IRQ 29]
372 root 11656 S /yealink/bin/sipServer.exx
374 root 2808 S /usr/sbin/inetd
375 root 2808 S /bin/sh /yealink/scripts/TR069.sh
395 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
396 root 18104 S /yealink/bin/Screen.exe
397 root 18104 S /yealink/bin/Screen.exe
398 root 11168 S /yealink/bin/tr069_client
399 root 11924 S /yealink/bin/autop.exe
401 root 11924 S /yealink/bin/autop.exe
402 root 11168 S /yealink/bin/tr069_client
403 root 11168 S /yealink/bin/tr069_client
404 root 18104 S /yealink/bin/Screen.exe
407 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
408 root 18104 S /yealink/bin/Screen.exe
409 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
410 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
411 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
412 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
413 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
414 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
415 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
416 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
417 root 18104 S /yealink/bin/Screen.exe
418 root 18104 S /yealink/bin/Screen.exe
419 root 0 SW< [IRQ 45]
420 root 18104 S /yealink/bin/Screen.exe
421 root 18104 S /yealink/bin/Screen.exe
422 root 18104 S /yealink/bin/Screen.exe
423 root 18104 S /yealink/bin/Screen.exe
424 root 18104 S /yealink/bin/Screen.exe
426 root 18104 S /yealink/bin/Screen.exe
427 root 18104 S /yealink/bin/Screen.exe
428 root 18104 S /yealink/bin/Screen.exe
434 root 18104 S /yealink/bin/Screen.exe
437 root 2268 S /sbin/udhcpc -b -i esw0 -a -s /yealink/bin/rtServer.e
505 root 11168 S /yealink/bin/tr069_client
507 root 11168 S /yealink/bin/tr069_client
508 root 11656 S /yealink/bin/sipServer.exx
509 root 11656 S /yealink/bin/sipServer.exx
510 root 11656 S /yealink/bin/sipServer.exx
511 root 11656 S /yealink/bin/sipServer.exx
513 root 11656 S /yealink/bin/sipServer.exx
515 root 2808 S sh -c cd /tmp;ifconfig >> Messages;ps >> Messages;tar
517 root 2808 R ps
esw0 Link encap:Ethernet HWaddr 00:15:65:4E:24:91
inet addr:10.1.11.3 Bcast:10.255.255.255 Mask:255.255.254.0
inet6 addr: fe80::215:65ff:fe4e:2491/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:638 errors:0 dropped:0 overruns:0 frame:0
TX packets:481 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:284523 (277.8 KiB) TX bytes:216619 (211.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
PID USER VSZ STAT COMMAND
1 root 2808 S init
2 root 0 SW [ksoftirqd/0]
3 root 0 SW< [desched/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
10 root 0 SW< [kthread]
13 root 0 SW< [kblockd/0]
39 root 0 SW [pdflush]
40 root 0 SW [pdflush]
42 root 0 SW< [aio/0]
41 root 0 SW [kswapd0]
48 root 0 SW [kseriod]
60 root 0 SW [mtdblockd]
88 root 0 SW< [IRQ 8]
91 root 0 SW< [IRQ 15]
120 root 0 SW< [kmkit]
141 root 0 SWN [jffs2_gcd_mtd4]
211 root 2808 S init
233 root 0 SW< [IRQ 35]
236 root 2808 S /bin/sh /yealink/scripts/Net.sh
238 root 7340 S /yealink/bin/configServer.exx
246 root 10532 S /yealink/bin/rtServer.exx
253 root 2268 S /sbin/syslogd -S -O /tmp/Messages -s 200 -b1
256 root 10532 S /yealink/bin/rtServer.exx
257 root 10532 S /yealink/bin/rtServer.exx
258 root 10532 S /yealink/bin/rtServer.exx
264 root 2808 S /bin/sh /yealink/scripts/ScreenApp.sh
274 root 18104 S /yealink/bin/Screen.exe
326 root 9004 S /yealink/bin/dot1x.exe -B -i esw0 -c /yealink/config/
330 root 6044 S ./sbin/lighttpd -f /yealink/bin/lighttpd/config/light
335 root 12176 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
342 root 2808 S /bin/sh /yealink/scripts/SipApp.sh
343 root 2808 S /bin/sh /yealink/scripts/VpmApp.sh
344 root 8108 S /yealink/bin/pcap.exx
346 root 11924 S /yealink/bin/autop.exe
338 root 6888 S /yealink/bin/lldpd &
363 root 12176 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
364 root 12176 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
352 root 7400 S /yealink/bin/lldpd &
370 root 0 SW< [IRQ 29]
372 root 11656 S /yealink/bin/sipServer.exx
374 root 2808 S /usr/sbin/inetd
375 root 2808 S /bin/sh /yealink/scripts/TR069.sh
395 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
396 root 18104 S /yealink/bin/Screen.exe
397 root 18104 S /yealink/bin/Screen.exe
398 root 11168 S /yealink/bin/tr069_client
399 root 11924 S /yealink/bin/autop.exe
401 root 11924 S /yealink/bin/autop.exe
402 root 11168 S /yealink/bin/tr069_client
403 root 11168 S /yealink/bin/tr069_client
404 root 18104 S /yealink/bin/Screen.exe
407 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
408 root 18104 S /yealink/bin/Screen.exe
409 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
410 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
411 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
412 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
413 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
414 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
415 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
416 root 9880 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
417 root 18104 S /yealink/bin/Screen.exe
418 root 18104 S /yealink/bin/Screen.exe
419 root 0 SW< [IRQ 45]
420 root 18104 S /yealink/bin/Screen.exe
421 root 18104 S /yealink/bin/Screen.exe
422 root 18104 S /yealink/bin/Screen.exe
423 root 18104 S /yealink/bin/Screen.exe
424 root 18104 S /yealink/bin/Screen.exe
426 root 18104 S /yealink/bin/Screen.exe
427 root 18104 S /yealink/bin/Screen.exe
428 root 18104 S /yealink/bin/Screen.exe
434 root 18104 S /yealink/bin/Screen.exe
437 root 2268 S /sbin/udhcpc -b -i esw0 -a -s /yealink/bin/rtServer.e
505 root 11168 S /yealink/bin/tr069_client
507 root 11168 S /yealink/bin/tr069_client
508 root 11656 S /yealink/bin/sipServer.exx
509 root 11656 S /yealink/bin/sipServer.exx
510 root 11656 S /yealink/bin/sipServer.exx
511 root 11656 S /yealink/bin/sipServer.exx
513 root 11656 S /yealink/bin/sipServer.exx
519 root 2808 S sh -c cd /tmp;ifconfig >> Messages;ps >> Messages;tar
521 root 2808 R ps
P.S.
I've got an idea that the phone's time is not correct at the time of bootup and it rejects the certificate because it's not yet valid. But how to overcome this?
(This post was last modified: 05-21-2015 08:53 PM by blind_oracle.)
|
|
