New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T19 - auto provisioning problem
Author Message
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #3
RE: T19 - auto provisioning problem
(05-19-2015 05:31 AM)Yealink_James Wrote:  Hello,

Can you use the follow parameter to do an autoprovision:

local_time.summer_time = 1
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.manual_time_enable = 0
local_time.time_format = 1
local_time.date_format = 5

Regards,
James

Hi James

Thanks for your response. I tried your example. It also does not work for T19P. Question, is the sequence / order of the command mandatory?

My current sequence is:
Code:
local_time.dhcp_time = 0
local_time.time_zone = {$timezone}
local_time.time_zone_name = {$timezone_name}
local_time.manual_ntp_srv_prior = 0
local_time.ntp_server1 = {$network_time_server}
local_time.ntp_server2 = pool.ntp.org
local_time.interval = 21600
local_time.summer_time = 1
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.manual_time_enable = 1
local_time.time_format = 1
local_time.date_format = 5

Only different parameter is:
Code:
local_time.summer_time = 1


In my config I had:
Code:
local_time.summer_time = 2

None of these parameters are adopted.

On T32G & T38G range IP phone this config works perfect.
05-19-2015 05:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T19 - auto provisioning problem - lorn10 - 05-17-2015, 09:17 PM
RE: T19 - auto provisioning problem - lorn10 - 05-19-2015 05:02 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 1,534 07-02-2019 03:04 PM
Last Post: Fraukas2
Lightbulb Auto provision firmware ... Yuriy Y. 1 814 04-26-2019 05:40 AM
Last Post: Yuriy Y.
  Provisioning Multiple Wallpapers BryanLee 1 985 04-24-2019 08:39 PM
Last Post: joew
  T23G won't donwload y000000000044.cfg from Provisioning Server rsardinha 3 911 04-12-2019 06:13 PM
Last Post: rsardinha
  T22P always auto restart jamess2007 2 942 03-13-2019 11:49 AM
Last Post: Langveldt
  Firewall Settings for Auto Provisioning ChristophWHAT 2 1,364 02-04-2019 12:47 PM
Last Post: ChristophWHAT
  Multiple provisioning servers Integra Business Solutions Inc. 4 1,779 10-26-2018 06:49 PM
Last Post: Integra Business Solutions Inc.
  Auto Provisioning Hangs Rus 1 1,213 10-17-2018 11:06 AM
Last Post: Rus
  Auto provisioning file names shane.caznet 1 1,489 10-12-2018 02:56 PM
Last Post: jolouis
  Auto-Provision Firmware Rus 0 1,080 08-24-2018 11:07 AM
Last Post: Rus

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication