T19 - auto provisioning problem

[lorn10]

Hi there

Unfortunately I have a problem with auto provisioning on my Yealink T19P phones. The following parameters works great for Yealink T32G & T38G, but not for Yealink T19P. For example, the T19P phones do not apply any daylight data trough provision. It seems that only a little part of the provision file are applied.

According to the documentation I found, both phones use M7 template format. However, T19P has V72 firmware while T3xG has V70+ firmware.

What I am doing wrong? Could someone tell me furthermore the correct syntax for European daylight savings on T19P? It seems that it is not the same like on T3xG.

Note: Daylight savings begins in Central Europe always at the last Sunday in March at 01:00 UTC (02:00 CET) until the last Sunday in October at 01:00 UTC (03:00 CEST).

I use FreePBX 5.211.65-21 and OSS End Point Manager 2.11.9.

Code:

#!version:1.0.0.1
## the file header "#!version:1.0.0.1" can not be edited or deleted. ##

#
local_time.dhcp_time = 0
local_time.time_zone = {$timezone}
local_time.time_zone_name = {$timezone_name}
local_time.manual_ntp_srv_prior = 0
local_time.ntp_server1 = {$network_time_server}
local_time.ntp_server2 = pool.ntp.org
local_time.interval = 21600
local_time.summer_time = 2
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.manual_time_enable = 1
local_time.time_format = 1
local_time.date_format = 5

.
.