[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
phone stating in LLDP that it is half duplex
Author Message
mikes Offline
Junior Member

Posts: 24
Joined: Nov 2014
Reputation: 0
Post: #1
phone stating in LLDP that it is half duplex
I have issues with T4X series phones showing in their LLDP they send to the Ethernet switch that they are half duplex. Both the phones WAN port and the Ethernet switch are set for Auto Negotiate. I see the same in the LLDP if both the phone and the Ethernet switch are set to 100 M full duplex. The phone I tested with is a T41P Firmware Version and Hardware Version I am troubleshooting a delay audio issue and want to clear up this apparent mismatch so as to eliminate it being the cause.

Here is the output of the switches debug of LLDP.

2015.04.15 04:01:42 : LLDP: giga-swx 0/19: RX LLDPDU from 00:0A:6B:03:B3:E1 len
= 198
2015.04.15 04:01:42 : LLDP: Chassis ID (Network Address) ""
2015.04.15 04:01:42 : LLDP: Port ID (MAC Address) "00:0A:6B:03:B3:E1"
2015.04.15 04:01:42 : LLDP: Neighbor Port ID: 00:0A:6B:03:B3:E1 on
2015.04.15 04:01:42 : LLDP: TTL 180
2015.04.15 04:01:42 : LLDP: System Name "T4X_SPI"
2015.04.15 04:01:42 : LLDP: System Description ""
2015.04.15 04:01:42 : LLDP: System Capabilities:
Bridge, Router, Telephone
Enabled System Capabilities:
Bridge, Telephone
2015.04.15 04:01:42 : LLDP: Port Description "WAN PORT"
2015.04.15 04:01:42 : LLDP: Negotiation Status: "enabled"
LLDP: Speed/Duplex: "100M/half-duplex"
2015.04.15 04:01:42 : LLDP: LLDP-MED Capabilities:
Other, Repeater, Router, Telephone
LLDP: Application/VLAN ID/CoS/DSCP: Voice/4/5/46 (tagged)

2015.04.15 04:01:42 LLDP LLDP: Speed Duplex mis-match on giga-swx 0/19. Speed/D
uplex: "100M/full-duplex" Neighbor Speed/Duplex: "100M/half-duplex"
04-15-2015 08:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
phone stating in LLDP that it is half duplex - mikes - 04-15-2015 08:29 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast Stops Working until Phone Rebooted Blake1 11 7,545 09-21-2023 05:47 PM
Last Post: axiompm
  Is there a way to get the incoming caller phone number with an Action URI? troy44 1 333 09-04-2023 01:46 PM
Last Post: Regend_Yealink
  On MP50s responding to some phone trees ends the call TRK45 1 795 05-18-2023 04:46 PM
Last Post: complex1
  Import xml contacts to Yealink Phone upon provisioning via TFTP vusald 1 1,548 02-18-2023 06:30 PM
Last Post: complex1
  W60B - URL for Remote Phone Book Bosstoad 2 1,962 01-06-2023 02:58 AM
Last Post: Bosstoad
  Can MP56 Teams phone be converted to a standard SIP phone? jliu@grandriver.ca 0 1,056 11-10-2022 01:25 AM
Last Post: jliu@grandriver.ca
  MP56 phone stuck in Company Portal - Connecting loop jhurst@lansolutions.net 0 2,394 09-08-2022 06:59 AM
Last Post: jhurst@lansolutions.net
  URL for returning the current phone state? johnbeaumont 6 7,753 06-15-2022 05:21 AM
Last Post: troy44
  Visitor preview before picking up the phone T58 dermosko 0 2,688 10-01-2021 11:41 AM
Last Post: dermosko
  Questions about the new MP58 phone jaseinatl 4 7,527 09-03-2021 01:09 AM
Last Post: ystrooba

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication