creating a custom button layout on the t48g xml browser

[cptjack]

It would be a great advantage if the T48 could define touch URI regions. This would open up a whole range of posibilities...

Meanwhile, you could use the SoftKey approach to still have a touch region on the screen to emulate the controls. The T48G only displays 2 large buttons if you only specify 2 in the XML.

Code:

<YealinkIPPhoneImageScreen doneAction="" Beep="no" Timeout="120" LockIn="no" mode="regular">
<Image horizontalAlign="right" verticalAlign="top">http://server/image.png</Image>
<SoftKey index = "1"><Label>° Up</Label><URI>http://server/up.xml</URI></SoftKey>
<SoftKey index = "4"><Label>° Down</Label><URI>http://server/down.xml</URI></SoftKey>
</YealinkIPPhoneImageScreen>

Or you might try the ImageMenu option, which can assign URIs to the Keypad buttons 0-9, * and #. In this case you will need to provide some visual hints which key to press on the physical buttons of numeric keypad. Unfortunately you can't use the arrow buttons for this.

Code:

<YealinkIPPhoneImageMenu doneAction = "URI" Beep = "yes" Timeout = "120" LockIn = "no" mode="regular">
<Image horizontalAlign="middle" verticalAlign="middle" width="475" height="344">http://server/image.png</Image>
<URIList base="http://server/yealink/">
<URI key="*">up.xml</URI>
<URI key="#">down.xml</URI>
</URIList>
</YealinkIPPhoneImageMenu>

Or a combination of both...