use 2 base for big dect coverage?

[Flora_Yealink]

Hello manne,
In your scenario , maybe you can try to use the bestbase feature, the handset register to two bases , and register the same account on these two bases ,assign the account to the handset.


below is the details :

1. Register the handset to these two bases. For example base1 locates in the floor 1 and the base 2 locates in floor2.

2. Select the option of Bestbase on the handset follow the path: Settings-Registration-Select Base

3. Handset will search for the base stations and select the best signal strength base to connect.

4. When placing an outgoing call from floor 1 and walking to floor 2, it will keep connection with floor 1 base until the signal is too weak to support this call online, then this call will hung up and the handset will connect to another base which with better signal strength automatically.
For example:
Supposed Extension 101 registered in floor 1 base1, Extension 101 registered in floor 2 base2.

101 and 102 all assigned to this handset.
When placing a call from extension 101 and walking from base1 covered range to base2 covered range, this call will hang up first, then connect to base2 automatically .

Would you please test and let us know if it can meet your requirment ?
Best Regards!