Problem with W52P Base and Cisco POE

[rjsears]

Just an update...seems like this was a non-issue caused by the client. Basically they unplugged and moved the base unit. In doing so, one person unplugged it and yet another person moved it. When it came time to hook it back up, the person plugged in the power adaptor and then plugged it into the POE port on the cisco switch. The W52 does not like this at all. You can do either, but you cannot do both. I verified this operation on another unit last night.

If you try and use both the base unit flips out and will do neither.

Thanks for your help James, maybe this will help someone else out of the same spot!