[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G - Bugs or "Features"?
Author Message
dabert Offline
Junior Member
**

Posts: 1
Joined: Nov 2016
Reputation: 0
Post: #1
T48G - Bugs or "Features"?
After successfully installing my new T48G onto a Fritzbox 7490 (most widely used router here in Germany), I have the following observations, which I suggest to be addressed by the Yealink Team:

1) Firmware 35.81.0.15 - unusable due to the MWI flashing when screen powers off bug (as reported previously here) - 35.80.0.130 used instead.

2) Speaker "toggle" button - during a call using the handset, toggling the Speaker button (to transfer the call to the speaker) does nothing. The only way to Transfer the call from the handset to the Speaker is to first engage the Headset button and then the Speaker button to get the call onto the Speaker. Is this the desired behaviour or can it be addressed in a future Firmware? A direct transfer from handset to speaker sure works with any other Speaker phone I know so a Change here would be certainly helpful and appreciated.

3) Line 1 is Setup using the first SIP account in the Fritzbox, mandatory user Name from the Fritzbox is "620". Unfortunately, the Fritzbox Voicemail number for the corresponding voicemalbox is **600.
In order to receive MWI indications, I have to add "620" or "620@Fritzbox" in the "voice_mail.number.X field" (**600 does not give me MWI indications). This then precludes me from using the Message button or the pop-up box to listen to my Voicemails as the T48G then dials 620 when used in this case which results in an Abort, even when the MWI is flashing (as it is the number already in use at that time).
Workaround is to add a DSS button dialing **600 to check the voicemails.
It would be very much appreciated, if there where 2 number fields available - one for the MWI indication and another for the Mailbox number.
In all cases where the MWI/mailbox number is the same, the user would simply have to enter the same number twice during setup. But for those who have a Fritzbox or a router with similar behaviour, we could then use ALL T48G Voicemail Features as designed.

Any comments or Feedback would be appreciated!
11-02-2016 12:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T48G - Bugs or "Features"? - dabert - 11-02-2016 12:03 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 37,994 08-01-2021 06:14 PM
Last Post: Phil2021
Question T48G + WH66 Futureweb 1 1,484 06-09-2021 09:22 PM
Last Post: Futureweb
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 2,197 04-09-2021 05:16 PM
Last Post: eurix
  WF50 wifi adapter on T48G? freak 2 5,273 10-31-2020 05:41 AM
Last Post: SCPCJNR
  T48G Onscreen keyboard languages eliah 7 11,372 10-30-2020 06:51 PM
Last Post: complex1
  Phone features not working KenleyHickman 10 7,931 09-14-2020 07:52 PM
Last Post: KenleyHickman
  t48G SFB not working at all now j.pakula 0 1,630 06-22-2020 02:36 PM
Last Post: j.pakula
  T48G Shows "anonymous" in the display Lazzard 2 3,339 03-05-2020 07:04 PM
Last Post: Lazzard
  T48G Problems with old Plantronics Headset Lazzard 3 4,370 03-05-2020 07:02 PM
Last Post: Lazzard
Exclamation T46S - Call Forward missing from Features Menu on Phone mmoore 1 3,427 01-16-2020 07:41 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication