Provisioning Issue auto_provision.power_on = 1 required for Sip Notify

[Frank Drews]

Hi James, Hi all

just to get this right: the default value for sip.notify_reboot_enbale is , that the phone will reboot on "Event: check-sync" in Notify message, ti will not reprovision.

So if somebody, like we change the auto provision mode; auto_provision.mode = 0, (#0-Disabled (default), 1-Power on) you loose the provisioning access to the phone.

This is not very transparent, if you read the manuals etc. you don't get the impression, that changing the auto_provision.mode value, that this will effect the ability to provision using the 3cx management console. As far as i understand using the default values:
auto_provision.mode = 0
sip.notify_reboot_enbale = 1
will result in no-access to reprovisioning phones from the 3cx management consoles.

I think I must confuse some things, but I it looks this way to me at the moment.

All the best

Frank