[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn on backlight with keypress without action
Author Message
telepathinc Offline
Junior Member
**

Posts: 33
Joined: Dec 2012
Reputation: 0
Post: #6
RE: Turn on backlight with keypress without action
The left or right arrow key are defaulted to Switch Account UP and Switch Account Down
IF this phone is registered to ONE account only - then EITHER Left or Right will accomplish with 100% solution

If you register on multiple accounts - you COULD disable these keys in the CONFIG by making them TYPE = 0
Although you would loose that account change functionality
However if you SHOW Line Keys by separate registration - and you customer is uses LINE keys to change account for outbound dialing, then you could disable the left right arrow keys

Even if you have MULTIPLE account registration - There may be GOOD reason to disable the left and right arrow keys - They silently and almost INVISIBLY change the default account.

IF you accidentally hit one of these keys the ONLY indication you have that you have changed your NEXT dialout account is the LABEL at the bottom of the display - they are very small on the T41 ( and barely noticeable on ANY of the phones ) ---- You may inadvertently dial out on a second or third account - while your intent was to dial out on your default account

Bottom Line
One account ?? - Left or Right Arrow = 100%
Multiple account - X key works at 98%
Multiple accounts with DISABLED left and right arrow keys = Left or Right arrow = 100%
03-01-2015 06:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Turn on backlight with keypress without action - telepathinc - 03-01-2015 06:39 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  not able to get sip and account related details using action uri rajat_asthana 0 550 12-26-2023 03:51 PM
Last Post: rajat_asthana
  Turn ON and OFF LED with XML mhoekstratelpa 1 1,701 02-28-2023 09:04 PM
Last Post: complex1
  Backlight comes on after autoprovision jonathanattwood 0 2,441 12-21-2021 10:30 PM
Last Post: jonathanattwood
  Action URI response asszem 0 2,289 10-21-2021 12:30 AM
Last Post: asszem
Bug Yealink T46G wont turn on after firmware update mike702 1 5,649 02-02-2021 08:21 PM
Last Post: complex1
  Backlight lights up based on SIP session expire CFortC 6 9,528 09-11-2020 01:29 PM
Last Post: CFortC
Exclamation Dim Backlight T41P??? gatorphan 4 10,926 08-01-2019 05:33 PM
Last Post: jolouis
  Action URL Firmware Bug in 66.84.0.15 rickstinson 0 4,413 03-25-2019 07:57 AM
Last Post: rickstinson
  How do you turn off custom linekey configuration ipcsolutions 2 7,213 01-28-2019 08:21 PM
Last Post: ipcsolutions
  Turn off all Missed Call indication but still receive Missed Calls in the Log ipcsolutions 2 7,497 01-12-2019 09:56 PM
Last Post: ipcsolutions

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication