[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52p Not accepting <sip:anonymous@********.co.za
Author Message
Derick_Syrex Offline
Junior Member
**

Posts: 2
Joined: Oct 2016
Reputation: 0
Post: #3
RE: W52p Not accepting <sip:anonymous@********.co.za
(10-27-2016 02:33 PM)Yealink_Lucia Wrote:  Hi Derick,

About your problem do you mean the phone will reject all of the incoming call from outside? What is the number show in the call log? But the incoming call from the inside can work normally?

If the answer is yes, please share us more information to do trouble shooting:
1. What is the number show in the LCD screen when there are an outside incoming? Is it show "Unknow" or show others? It would be better if you can provide a picture.

2. Please update the firmware to the latest version(http://download.support.yealink.com/down...0.0.15.zip) and do test again. If the problem still exist, please provide the level 6 syslog, config.bin and pace trace when you reproduce the issue to Lucia@yealink.com.
About how to get the three files, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=313

3.Please also provide the three files of the normal incoming call(inside call) to make a comparison. Thank you.

4. How many phones you have in total? And how many of them have the issue?

Thank you for your information in advanced.

Best Regards,
Lucia Lu

Hi,

There is no number showing on the LCD screen, the call gets rejected by the base station before the handset rings.
I have updated the firmware and the problem is still there.
Normal incoming calls work as it presents the base station with the internal extension the call is coming from. It is only calls from outside the company it rejects.
This is only happening on the W52p with 4 phones connected to the base station, all the other brand of phones work fine when dialing from outside.

The other phones on the network are Snom and Cisco. They also get presented with a "anonymous" source number and the call goes through.

It is only on the Yealing base station where the "anonymous" source gets rejected. In the post I did supply both scenarios. One "anonymous" and one "known".
10-27-2016 04:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: W52p Not accepting <sip:anonymous@********.co.za - Derick_Syrex - 10-27-2016 04:02 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 620 01-22-2024 07:15 PM
Last Post: complex1
Sad W52P not picking up IP Burkni 4 4,304 09-19-2023 06:22 PM
Last Post: Burkni
  W56H with W52P Base dmvcomms 7 7,684 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,968 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,767 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,550 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 7,044 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 17,462 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Is there no call history in web management panel in W52P? poznaniak 1 7,728 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 9,659 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication