New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Phone termination issues
Author Message
nikko Offline
Junior Member
**

Posts: 1
Joined: Apr 2013
Reputation: 0
Post: #1
Phone termination issues
Hello,
I am not sure if support answers forums faster than emails so i will try both. I am considering upgrading some older polycom phones in the call center to Yealink phones on the advise of a vendor. I ordered one T38 to test but after recieving and setting it up in a PIAF environment, the phone has some termination issues. Here is what it does.
when i make an outbound call, the terminating phone will ring quickly and hang up and show a missed call, then it will ring again, all the while the originating t38 shows as ringing with one call. I have not seen anything in the logs to indicate this is two calls and cannot understand what causes this behaviour. this is a default set up with only the acct name and pw added. all other default settings were left alone. this behaviour is non existent in all the polycom phones that have a basic default setup as well. I have sent a pcap via email to support if that helps.

thanks
04-08-2013 10:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Phone termination issues - nikko - 04-08-2013 10:53 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  POE failure causing phone to reboot jasit 1 1,900 11-09-2017 07:32 AM
Last Post: Aishion_Yealink
  Phone Panel not dialing out - no errors Cleartrunk 2 4,602 08-15-2015 11:52 AM
Last Post: Cleartrunk
  Phone not working with 802.1x md5 validation. fabianochoueiri@yahoo.com.br 2 3,982 07-25-2015 05:30 AM
Last Post: fabianochoueiri@yahoo.com.br
  Customizing phone user interface mdu113 2 4,634 07-24-2015 05:48 AM
Last Post: mdu113
  T38G issues Jadzia 3 5,813 05-18-2015 06:11 AM
Last Post: rafael@protel.inf.br
  T38G transfer failed to an other phone or PSTN Digicel AFG 3 5,702 12-04-2014 04:35 AM
Last Post: Digicel AFG
  T32G phone died Grumblegeek 1 3,699 05-04-2014 11:21 PM
Last Post: Yealink Support
  38.70.0.168 (Supported by 3CX Phone System) jasit 11 14,583 12-09-2013 11:32 AM
Last Post: Yealink Support
  Remote Phone Book Search vondie 4 7,516 11-28-2013 05:37 AM
Last Post: vondie
  clock phone centoasa 4 9,033 10-24-2013 03:01 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication