Setup to answer one phone from another in group

[CWR]

(02-09-2015 11:13 AM)Yealink_Daniel Wrote:  Hi,

Thank you for your comments, Craigreilly.

To Paul,
About the pickup code, please contact your service provider for help.
Then please enter the pickup code into the extension value.
For example, the PBX is 3CX, the pickup code is *20*, you will be able to pickup a entension by BLF keys after configured like this:


If there is any question, please feel free to contact us.

Best regards

Daniel, although this is how the 3cx template is configured, we did not have luck with this working for us.
We had to put the extension into both fields on the BLF page and put the pickup code into another tab.