[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to enable "second" dialtone on T42, T46G?
Author Message
cadillackid Offline
Junior Member
**

Posts: 26
Joined: Jan 2015
Reputation: 0
Post: #1
How to enable "second" dialtone on T42, T46G?
we have been a huge user of Aastra / polycom phones in the past, however we are beginning to test Yealink T4x phones in the field with the intentions of switching to them. so far our results are very positive, except the biggest complaint we get is when they dial '8' or '9' for an outside line, they get silence and not the familiar second dialtone. we replace a LOT of legacy PBX's where this feature exists.. but I cannot figure out how to enable it on the Yealink phones. I have tried various combinations in my dialnow rules but unable to get any result.

on polycom, you would make a dialplan rule say:
9,18005551212 and after the user dialed a 9, they hear dialtone again until they dial the next digit (1 in this case).
all of the digits 918005551212 are sent to the SIP server.

on Aastra it is 9;18005551212 again dialtone is played after the '9'.

how can I accomplish on the yealink T4x and T2x phones?
-Christopher
01-31-2015 10:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
How to enable "second" dialtone on T42, T46G? - cadillackid - 01-31-2015 10:33 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 1,388 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 1,821 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 2,063 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  No dialtone - T46S, EHS36, Sennheiser headset Huleboer 0 2,394 09-28-2023 05:49 PM
Last Post: Huleboer
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 3,675 07-28-2023 10:27 PM
Last Post: complex1
  Send different codes on keystroke (enable and disable) Marsl84 0 1,140 04-21-2023 08:15 PM
Last Post: Marsl84
  T46G Multiple EXT Port amandah 2 2,404 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,742 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 12,243 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,538 10-28-2022 03:28 AM
Last Post: tredd1982

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication