Auto provision T20p firmware 9.70.23.6

[premier]

Hi James,

thanks for the info but the problem is that i don't have the autoprovision option on older firmware versions.
from a certain version and above, where i have this option, i managed to do it. the problem is that i don't know how to auto upgrade older version phones.

(02-03-2015 01:45 PM)Yealink_James Wrote:  Hi,

Can you check whether the attached instruction make sense.
It describes how to do an autoprovision.
For upgrading firmware, you have to put the rom file into http server firstly then write the upgrading parmaeter in the cfg file like:

firmware.url = http://<server address>/9.73.0.40.rom

Regards,
James