[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF lights and Kamailio server
Author Message
digitalaroma Offline
Junior Member
**

Posts: 12
Joined: Jan 2015
Reputation: 0
Post: #3
RE: BLF lights and Kamailio server
(01-29-2015 07:43 PM)Yealink_James Wrote:  Hi,

What's your phone model and phone firmware?
Do you mean that BLF key will light up but their status are wrong? Can you get a pcap trace to check what NOTIFY message server return? Since the BLF key status depends on the NOTIFY message from server.

Regards,
James

The IP phone is Yealink T 28:
Firmware Version 2.73.0.40
Hardware Version 1.0.0.4

We are using kamailio 1.4.x

When you first boot the phone none of the lights on the side buttons lights up. When you press them though, they dial the intended extension but the light status is all over the place like a Xmas tree and stay that way for half a day or so and some reset to green and some dont.

Also this is the configuration of the side buttons:
memorykey.1.line = 1
memorykey.1.value = park+71
memorykey.1.type = 16
memorykey.1.pickup_value = %NULL%
memorykey.1.xml_phonebook = 0
memorykey.2.line = 1
memorykey.2.value = park+72
memorykey.2.type = 16
memorykey.2.pickup_value = %NULL%
memorykey.2.xml_phonebook = 0
memorykey.3.line = 1
memorykey.3.value = park+73
memorykey.3.type = 16
memorykey.3.pickup_value = %NULL%
memorykey.3.xml_phonebook = 0
memorykey.4.line = 1
memorykey.4.value = 700
memorykey.4.type = 3
memorykey.4.pickup_value = %NULL%
memorykey.4.xml_phonebook = 0
memorykey.5.line = 1
memorykey.5.value = 201
memorykey.5.type = 16
memorykey.5.pickup_value = 201
memorykey.5.xml_phonebook = 0
memorykey.6.line = 1
memorykey.6.value = 203
memorykey.6.type = 16
memorykey.6.pickup_value = 203
memorykey.6.xml_phonebook = %NULL%
memorykey.7.line = 1
memorykey.7.value = 205
memorykey.7.type = 16
memorykey.7.pickup_value = 205
memorykey.7.xml_phonebook = %NULL%
memorykey.8.line = 1
memorykey.8.value = 201
memorykey.8.type = 16
memorykey.8.pickup_value = 201
memorykey.8.xml_phonebook = %NULL%
memorykey.9.line = 1
memorykey.9.value = 107
memorykey.9.type = 16
memorykey.9.pickup_value = 107
memorykey.9.xml_phonebook = %NULL%
memorykey.10.line = 1
memorykey.10.value = *80
memorykey.10.type = 0
memorykey.10.pickup_value = %NULL%
memorykey.10.xml_phonebook = 0


The BLF settings for buttons 5-9 are the ones I am concerned about.
(This post was last modified: 01-29-2015 10:52 PM by digitalaroma.)
01-29-2015 10:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: BLF lights and Kamailio server - digitalaroma - 01-29-2015 10:29 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46s - Re-registration delay SIP Server 2 TVAdmin 0 3,290 04-15-2020 07:46 PM
Last Post: TVAdmin
  Yealink XML Autentication with Mitel MX-ONE Telephony Server mpascuas 2 10,748 07-07-2016 05:15 PM
Last Post: jmoore
  v2.72.0.30 and T28P BLF lights arainc 8 17,106 11-13-2014 04:52 AM
Last Post: arainc

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication