[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G using Wifi and Mulitcast paging
Author Message
joshua@itstel.com Offline
Junior Member

Posts: 41
Joined: Jul 2014
Reputation: 0
Post: #3
RE: T48G using Wifi and Mulitcast paging
He is more detailed information after extensive testing in my test lad. T48G phone with firmware using Wifi Adapter.

When the phone powers up and registers, the multicast receiving will work within 135 seconds. After that it stops working. If you receive a multicast page every 100 seconds it will always work - I did this for 12 minutes. It stops working if there is more than 135 seconds between multicast pages. In the web GUI, if I go to Network-->WiFi-->Click on the SSID--->Click Edit, the phone resets the WiFi and will receive multicast for up to 135 seconds again.

This does not happen when I use the LAN port instead of the WiFi adapter for connectivity.

Does anyone use T48G phones with WiFi adapters with multicast paging and it works? I need to find out before I rely on this solution for my customers. I'm trying to determine if it's the T48G, or a setting in my WiFi network.

In this same test lab, I have a t46G phone connected across a WDS WiFi network, and since that continues to receive multicast pages, I have to believe the WiFi network is not shutting down the multicast packets. I must be the T48G phone. Again, does anyone have T48G phones using the WiFi adapter with multicast paging receiving working? (I can always initiate a multicast page from the WiFi enabled T48G, its receiving the multicast that stops working) Thanks
(This post was last modified: 10-26-2016 01:57 AM by joshua@itstel.com.)
10-26-2016 01:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RE: T48G using Wifi and Mulitcast paging - joshua@itstel.com - 10-26-2016 01:47 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G initiate new call not working Lezlie 1 7,925 09-15-2020 02:32 PM
Last Post: complex1
  Anyone has firmware T48G XX.XX.193.xx ? Duy 1 9,826 04-12-2018 02:29 AM
Last Post: Evan_Yealink
  T48G Screen does not work Raj 1 11,674 02-19-2018 02:54 PM
Last Post: complex1
  T48G BOTE Connector not pairing doucheface1 5 18,990 10-24-2017 12:04 PM
Last Post: doucheface1
  T48G with SfB Firmware can't Signing in andre.hagmann@umb.ch 5 22,759 09-29-2017 12:24 PM
Last Post: jvoros
  T48G SIP to SfB clsh 2 9,065 09-29-2017 12:18 PM
Last Post: jvoros
  T48G firmware update from SfB Server xxlsuper 4 14,571 07-11-2017 06:49 AM
Last Post: Travis_Yealink
  T48G and Skype for Business Online - Firmware Question Duckman30 1 9,454 04-11-2017 07:27 AM
Last Post: Lucia_Yealink
  Yealink T48G Starcodes on Web Interface Skamqi 1 7,698 03-24-2017 05:09 PM
Last Post: CWR
  T48g and Skype for Business saxknicks 2 11,875 01-28-2017 05:24 PM
Last Post: tkgovman007

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication