New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41P BLF and CallPickup issue
Author Message
systemstateit Offline
Junior Member
**

Posts: 6
Joined: Jan 2015
Reputation: 0
Post: #1
T41P BLF and CallPickup issue
Hi,
I've seen some other threads on this I understand how to get this working, however it does not appear to be able to work the way I want it to.

I use a hosted PBX (asterisk underneath), and I want a DSS key to be both a BLF monitoring an extension and to be able to pickup the call to that extension.

For example I am 101 and want to monitor 109.
Value -> 109 Label -> Bob Extensions -> *8 (or just set it globally in advance menu)
If I put in the details as instructed the phone monitors 109 correctly and flashes RED when a call comes in. If I press the line key it tries to call *8109 and I get a 'not a valid destination' error
Problem is the extensions on the hosted PBX are all part of a pickup group, so all I really need to do is dial *8 with nothing afterwards and it picks the call up.
Setting the DSS key as a direct pickup/group pickup works as it will just dial *8, but then I don't get the lamp indicator.

Is there a way to monitor an extension without it trying to tack that extension number on after *8?

Currently I have just used a spare DSS key as a direct pickup line while still using BLF to monitor/speed dial, but it's a bit of a hack.

Note: This is working on our cisco spa303 phones using extended function: fnc=blf+sd+cp;sub=109@pbx.hosted.provider

Thanks
01-20-2015 12:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T41P BLF and CallPickup issue - systemstateit - 01-20-2015 12:50 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  LDAP Directory Configuration Issue it_prevent 1 433 05-15-2019 05:55 AM
Last Post: Mike_Yealink
  Export CFG configuration file Issue Fraukas2 0 1,855 11-08-2017 06:19 PM
Last Post: Fraukas2
  T42G dhcp issue Neway 1 2,108 06-15-2017 03:01 AM
Last Post: Karl_Yealink
  Yealink T23P PC Port Issue Mohamed123 6 4,448 03-13-2017 12:51 PM
Last Post: Mohamed123
  Multiple Ringing Lines on T41P ucidirect 2 3,048 12-05-2016 06:47 AM
Last Post: Lucia_Yealink
  RingCentral BLF Issue mitchfa 2 3,429 11-07-2016 06:58 PM
Last Post: mitchfa
Sad T41P BLF ligth not working goHelpDesk.com 2 3,033 10-15-2016 02:10 AM
Last Post: ModCraig
  T41P BLF not working steven.kst 1 2,974 08-12-2015 03:56 PM
Last Post: Yealink_Michael
  T48G issue register with PBXww adam.aberle@2icsoftware.com 1 3,080 07-03-2015 07:34 PM
Last Post: Elaine_Yealink
  Yealink SIP-T22P OpenVPN issue mahan77 17 34,627 06-07-2015 08:09 AM
Last Post: drvirus

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication