[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Queue hunting issue with T48G phones
Author Message
jexet Offline
Junior Member
**

Posts: 4
Joined: Dec 2014
Reputation: 0
Post: #1
Queue hunting issue with T48G phones
Hi Support,
We are using 3cx system with a priority hunting queue, the queue is functioning normally, however the issue is with the state of the first person in the priority list. When the first person receives a call and transfers the call, while the call is in the process of transferring(ie: the phone of the person who has received the transferred call is ringing), the phone is unavailable to receive calls and the priority list defaults to the second person.
In a company with a high volume of incoming calls, it's very disruptive for the secretary to be unable to receive any calls after transferring a call to another person. Sometimes that person takes a minute or more to answer the phone, which stops the secretary(the first person on the priority hunt) from being able to take any incoming calls. I may not be explaining this very well so maybe below will help:

Incoming call to A

A transferring call to B

Before B picks up the phone, A cannot receive any incoming phone calls.

B picks up the transferred call, A can now receive phone calls.

We contacted 3cx, this is what they replied:

Please note that a Queue agent can take 1 call at a time. After the agent hangs up, only then can they receive another incoming call into the Queue. A suggestion would be to decrease the amount of "transfer time". To do this please navigate to Settings>> advanced >> Custom Parameters and decrease the value for CALL_TRANSFER_ TRACKING_TIME. In addition the above it appears that the Yealink phones will not perform this functionality as they appear to be doing a Semi attended transfer in contrast to Snom and Cisco phones. That means that the yealink phone will wait untill it receives a 200 OK from the transferred party before it makes itself available to the PBX after a blind transfer whereas a Snom or a Cisco phone will immediately send an OK back after pperforming the transfer and they are available to be polled immediately. Unfortunately this seems to be an issue with Yealink and we would recommend that you contact them and let them know about this.

Is there anyway around this?
01-15-2015 01:35 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Queue hunting issue with T48G phones - jexet - 01-15-2015 01:35 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink A30/CTP18 pairing issue Subaquatic 0 196 03-14-2024 12:23 PM
Last Post: Subaquatic
  Phones no longer support Let Encrypt johnbeaumont 20 31,344 01-19-2024 08:09 AM
Last Post: tom-nbb
  Firmware phones T33G esoriano 1 885 12-13-2023 02:50 AM
Last Post: complex1
  MP54 Teams phones sometimes fail to log in jzcase 0 672 11-21-2023 12:26 AM
Last Post: jzcase
  W80DM and CUCM sip registration issue kozlov 1 1,157 11-15-2023 10:58 AM
Last Post: Alisha Kihn
  Phones without a "server/PBX" kermitxyz 0 655 11-13-2023 02:26 AM
Last Post: kermitxyz
Lightbulb Yealink T48G Won't Turn On (No Power) Bill. 5 25,153 07-08-2023 08:10 AM
Last Post: ziksk8
  WH67 call forwarding issue in Teams iapbonn 0 1,113 06-19-2023 02:32 PM
Last Post: iapbonn
  Issue with headsets, calls are spontaneously ended sanderv85 3 2,284 06-15-2023 06:44 PM
Last Post: complex1
  Yealink CP900 issue with Win11 - Help QMarkIT 0 1,162 05-16-2023 01:45 PM
Last Post: QMarkIT

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication