New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Calling from the call log
Author Message
firmtel Offline
Junior Member
**

Posts: 7
Joined: Jun 2014
Reputation: 0
Post: #5
RE: Calling from the call log
Hi James,

First of all thanks for the help and i have some additional information what might help.

The x.x.188.x is indeed customized we get it from our dutch vendor.
Like you said is tried also the original firmware 28.71.0.224 on my own phone and the issue is still there.

Where using 2600 Hertz freeswitch PBX solution. The T46 is extracting the number from the field "in-house calls" caller id of our PBX. In our case (and also with our customers) the default is our internal number 2xxx. When i enter in that field any random number the phone is calling that specific number. I also have support ticket open with 2600 Hertz as it's not clear on what side the problem lies as the T41 and W52P aren't showing this behavior.

There seems to be a difference in the answers from the SBC (5.172.222.5):
In the packet 389 the 183 session progress has remote party ID "2006"
In packet 434 the 200 OK has a remote party ID "31162232000"
It looks like the phone saves the progression caller id and not the 200 OK ID
(This post was last modified: 01-14-2015 09:57 PM by firmtel.)
01-14-2015 09:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Calling from the call log - firmtel - 01-12-2015, 06:08 PM
RE: Calling from the call log - ModCraig - 01-13-2015, 02:06 AM
RE: Calling from the call log - firmtel - 01-14-2015, 08:27 PM
RE: Calling from the call log - firmtel - 01-14-2015 09:50 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T58A SCA Shared Call Appearance with Call Manager cm_y 1 123 11-15-2019 09:42 AM
Last Post: Jacky_Yealink
  T29G can't hang up call unless end call is pressed Bizfon 1 110 11-14-2019 07:51 AM
Last Post: Paz_Yealink
  BLF and Call Park on T29G pureit 0 524 04-02-2019 01:36 AM
Last Post: pureit
  W56H- Remove Missed call list plainlanddental 5 2,944 01-02-2019 12:47 PM
Last Post: complex1
  T29G Remote Phonebook no lookup for incoming call Chris708 1 2,167 07-16-2018 03:15 PM
Last Post: Chris708
  T46G Call Fwd DSS Key enables / disables ALL fwd types MintTelecom 4 3,827 02-06-2018 05:28 AM
Last Post: Aishion_Yealink
  Duplicate Missed Call Enties on T38G koolkenh 2 4,274 11-03-2017 09:02 PM
Last Post: Ret
  T52S on call DSS key display too short tima 3 2,926 08-22-2017 01:13 AM
Last Post: Aishion_Yealink
  T38G Continues to ring after outbound call connects srcurtis 6 5,353 06-14-2017 09:51 AM
Last Post: Kevin_Yealink
Question Problem with forwarding call after no answer - SIP-T26P / SIP-T27P Yves 1 3,549 12-30-2016 06:52 AM
Last Post: Travis_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication