[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trying to unbrick base.
Author Message
SimonB Offline
Junior Member
**

Posts: 2
Joined: Dec 2014
Reputation: 0
Post: #1
Brick Trying to unbrick base.
I had a problem where the phone stopped working. My first step was to reboot the base, but once it was powered back up, the handset couldn't find it and I couldn't access the web admin UI.

I checked my router, and it did not appear to be taking an IP address from the DHCP server.

To try and bring it back to life, I followed the recovery guide I found on this forum, (via Tftpd32). However if I power up the basestation, only the power LED is lit and it does not obtain an IP address (as shown in the "DHCP Server" tab in Tftpd32).

If I power up the basestation while holding down the paging button, all three LED's light up and I see W5X.bin and W5X.rfs get transferred:

Code:
Connection received from 192.168.0.100 on port 1142 [30/12 15:53:57.069]
Read request for file <W5X.bin>. Mode octet [30/12 15:53:57.069]
OACK: <timeout=5,blksize=1468,> [30/12 15:53:57.069]
Using local port 61578 [30/12 15:53:57.069]
<W5X.bin>: sent 1032 blks, 1514044 bytes in 0 s. 0 blk resent [30/12 15:53:57.849]
Connection received from 192.168.0.100 on port 2047 [30/12 15:53:57.989]
Read request for file <W5X.rfs>. Mode octet [30/12 15:53:57.989]
OACK: <timeout=5,blksize=1468,> [30/12 15:53:57.989]
Using local port 58749 [30/12 15:53:57.989]
<W5X.rfs>: sent 5715 blks, 8388608 bytes in 5 s. 0 blk resent [30/12 15:54:02.279]

However the "DHCP Server" tab still doesn't show anything and the W52P.rom file is not transferred.
12-31-2014 05:24 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Trying to unbrick base. - SimonB - 12-31-2014 05:24 AM
RE: Trying to unbrick base. - SimonB - 01-06-2015, 11:30 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  internal call between two base stations fails janus 1 4,490 01-07-2021 07:20 PM
Last Post: complex1
  Can't de-register default base Nigutz 9 26,168 07-15-2019 09:11 PM
Last Post: GregoireG
  double base station proximity ipv6fill 2 7,964 03-21-2017 08:39 AM
Last Post: Kevin_Yealink
  New Handset Can't Register to Base SergioA 2 10,120 01-06-2017 06:20 PM
Last Post: SergioA
  Searching for Base aabramov 63 181,140 10-17-2016 10:43 AM
Last Post: Karl_Yealink
  Downgrading Base firmware to 25.73.0.27 from 25.73.0.40 bharat@metro 3 12,578 07-20-2016 08:53 PM
Last Post: complex1
  W52P Base default password under FW 26.73.0.11 ? voicewarellc 2 14,126 04-19-2016 07:21 AM
Last Post: VK2XXY
  Provision second W52H to existing base and 3cx vondie 10 44,958 02-26-2016 04:46 AM
Last Post: GreyFox
  Searching for Base gyegavian 1 6,693 01-12-2016 05:34 AM
Last Post: Klaus_Yealink
  Where can I buy a base station on its own? jofa 1 6,555 01-11-2016 06:12 PM
Last Post: Karl_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication