[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
running voip on third party server wtthout third party voip service
Author Message
Billx Offline
Junior Member
**

Posts: 17
Joined: Mar 2013
Reputation: 0
Post: #2
RE: running voip on third party server wtthout third party voip service
(12-26-2014 03:52 AM)asinshesq Wrote:  I currently have a number of yealink voip phones in my house that tie into a 3cx server I am running on a local laptop. The phone service to the outside world is analog (Fairpoint) and I use a patton fxo gateway to bridge from my 3cx system to the outside.

I realize that this is a newbie type question but I am curious: is it possible to sign up for a third party voip server (to replace my local 3cx server) without actually signing up for a third party voip service? Would that be a crazy thing to do (as opposed to actually signing up for a real voip service)?

If I were to go with a true third party voip service rather than just a server, would I still be using a gateway or would I connect the voip phones directly to the third party service?

----------------------------
You asked:
Is it possible to sign up for a third party voip server (to replace my local 3cx server) without actually signing up for a third party voip service?

You would need to look around to see if any Third Party Providers allow this. Most of them seem to provide at least one telephone number as part of the package.

If you did indeed find one and you want to use your existing telephone number with their service, then you would need to set up your Patton Gateway to be access from your Third Party Provider.

This would not be ideal and the voice quality would be poor.

Maybe just Port your existing number to the Third Party Provider?

If you just want to use the VOIP phones as an Intercom (no outside calls) then look at Callcentric.com.
You can get a free number and up to 10 extensions.
They do charge for 911 service.

----------------------------

If I were to go with a true third party voip service rather than just a server, would I still be using a gateway or would I connect the voip phones directly to the third party service?

If you get a telephone number from the provider, then you don't need to use your Patton Gateway at all.
Your VOIP phones would connect to your Internet Router to allow them to access the providers services.

-----------------------------

Hope this helps you.
12-27-2014 12:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: running voip on third party server wtthout third party voip service - Billx - 12-27-2014 12:49 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  VoIP Luiz Gustavo 1 1,189 05-22-2024 03:38 AM
Last Post: complex1
  Yealink VOIP phone losing connection every few minutes robertpowell 0 1,605 03-27-2024 02:29 PM
Last Post: robertpowell
  Phones without a "server/PBX" kermitxyz 0 1,475 11-13-2023 02:26 AM
Last Post: kermitxyz
  Service Full jpat1988 0 1,596 09-07-2022 09:58 PM
Last Post: jpat1988
  What is alarm server alarm.server.address ? (W59R) Ivan86 0 3,358 08-10-2021 04:42 PM
Last Post: Ivan86
  LDAP server is unavailable Andrei9385 2 11,277 07-16-2021 08:34 PM
Last Post: nolto
  List of service providers for YeaLink phones jaseinatl 1 8,903 03-30-2021 05:16 AM
Last Post: guru@ezeetel.com
  T46s won't try to register to server on local subnet jigjag 0 4,586 09-08-2020 10:52 PM
Last Post: jigjag
  .cfg file needed for Zultys provisioning server jerryp 0 4,913 01-30-2020 09:26 PM
Last Post: jerryp
  CP960 Third Party Apps bhayden 4 12,101 08-19-2019 04:43 AM
Last Post: S1Steven

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication