BLA without barge?

[mercutioviz]

(12-25-2014 04:19 PM)Yealink_James Wrote:  Hi Michael,

What's the PBX server these phones registered to?
In phone side there is no an option to enable/disable SCA/BLA barge-in. But generally there is an option in PBX server which can control this behavior.

The customer can try contacting their service provider to disable this fucntion.

Regards,

Hi James,

The phones are connected to a CudaTel, which is based on FreeSWITCH. I will review the SIP profile settings to see if FS has a means of controlling barge-in or not.

Thanks,
Michael