[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3CX and T46G
Author Message
grayhawk Offline
Junior Member
**

Posts: 2
Joined: Dec 2014
Reputation: 0
Post: #1
3CX and T46G
We are running the latest version of 3CX (v12 SP6.1) running on Yealink T46G firmware version 28.71.0.224

We are having major issues our headsets(AmTech AT3085 Monaural and multiple Plantronics headsets) The send volume on the microphones is just to high. It distorts and the patients either hang up or get extremely upset. We were forced to stop using the headsets.

I have been told by our vendor to change the custom template in 3CX (which isn't supported) under "Voice". I have tried every setting and nothing helped.

I have also been told to add the following lines under "Voice" in the template:

#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29.
#Require reboot;
voice.handfree_send =25
voice.handset_send = 35
voice.headset_send = 29

Editing the voice.headset_send down to around 10 or 12 seemed to fix our problem, but this isn't supported. If we have ANY issues 3CX will not support us due to a custom template being in place. Also this "fix" wasn't even in the original template so I am a little concerned about issues that these entries will cause.

Can anyone point me in a direction that will be supported?
12-10-2014 04:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
3CX and T46G - grayhawk - 12-10-2014 04:59 AM
RE: 3CX and T46G - James_Yealink - 12-10-2014, 09:57 AM
RE: 3CX and T46G - grayhawk - 12-10-2014, 12:54 PM
RE: 3CX and T46G - tsukraw - 12-23-2014, 01:11 PM
RE: 3CX and T46G - CWR - 12-24-2014, 03:41 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Change standard outgoing line on T46G oestersund 1 7,260 12-15-2018 09:58 PM
Last Post: support2
Bug T46g & T48G RADIUS 802.1x and SHA256 Bigmac 22 62,670 08-13-2017 07:54 PM
Last Post: MiKeDaDoC
  T46G: How to deactivate Live Dialpad totally? Werner1959 6 18,278 03-05-2017 08:21 PM
Last Post: Werner1959
  T46G with exp40 Paulo Batista 2 9,735 11-06-2016 01:57 AM
Last Post: CWR
  T46G eaches only incoming calls, no outgoing calls Ddorf 2 9,163 10-27-2016 12:46 AM
Last Post: anonymous1718628087441
  T46G Hostname not registering on DHCP fraukas 2 13,576 10-27-2016 12:34 AM
Last Post: anonymous1718628087441
  T46G Issues Save Volume settings + BLF pickup Jeroen 3 15,017 08-31-2016 02:47 AM
Last Post: CWR
  [SOLVED] T46G one way audio on outgoing calls Kamik 3 14,238 08-16-2016 06:22 PM
Last Post: Kamik
  T46G Power Saving Paulo Batista 1 7,769 08-14-2016 12:47 AM
Last Post: PavlovsPuppy
  401/403 authorization error on remote asterisk from T46G over VPN hexhex 1 11,256 07-06-2016 02:10 AM
Last Post: hexhex

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication