[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3CX Android Rejected call Auto Answers on T48
Author Message
myfastback.com Offline
Junior Member
**

Posts: 4
Joined: Dec 2014
Reputation: 0
Post: #1
3CX Android Rejected call Auto Answers on T48
I have a weird problem that came up as I am testing our system to go live.

On my extension 100, I have the 3cx Phone app installed on my Android as well as a T48 assigned. When I receive a call to my extension my 3cx android app and t48 ring. If i reject the call on the android app, the t48 will automatically pickup the call on speakerphone.

I have checked and auto answer is turned off. I have also checked the auto forwards settings, and all look to be correct. I factory defaulted the phone and reapplied the latest provisioning template from 3cx so I know I had a "Fresh" build. I still have the same issue.

I have tried this on another extension with the same 3cx Android app and T38's and there seems to be no issue.

What am I missing?????

Thanks in advance

I have done a little more testing:

I have 1 channel voice gateway hooked up, when a make a call from that gateway to my extension and reject the call, my desk phone continues to ring as it should. When I call from another extension (T38) and i reject the call, the T48 goes to speakerphone.

I removed the T48 and swapped in an extra T38 I have and it functions as it should from all extensions. (I reject the call and desk phone continues to ring)

So it would seem this is an issue with the provisioning template for the T48? I will say I was running in demo mode until a week ago when I purchased the full license for v12. When I did that I upgraded all the provisioning templates that were available, this issue COULD have started then.
(This post was last modified: 12-04-2014 05:21 AM by myfastback.com.)
12-04-2014 05:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
3CX Android Rejected call Auto Answers on T48 - myfastback.com - 12-04-2014 05:21 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP50 won't initiate a call on a Mac (Big Sur) computer? microdaft 1 644 11-21-2021 07:17 PM
Last Post: georgedendle
  Cannot disable audible Park notifications during active call livehappy42 3 393 11-13-2021 09:11 AM
Last Post: livehappy42
  T57W Call Park Alert bcramer 1 1,769 10-29-2021 05:33 AM
Last Post: livehappy42
Sad T22P No Sound on Call Pick Up oaltinsoy853 1 500 10-19-2021 07:22 PM
Last Post: complex1
  T58 Call Park and Transfer Problems user42491 1 1,223 08-03-2021 09:24 PM
Last Post: complex1
  T58A SCA Shared Call Appearance with Call Manager cm_y 1 3,825 11-15-2019 09:42 AM
Last Post: Jacky_Yealink
  T29G can't hang up call unless end call is pressed Bizfon 1 3,960 11-14-2019 07:51 AM
Last Post: Paz_Yealink
  BLF and Call Park on T29G pureit 0 2,972 04-02-2019 01:36 AM
Last Post: pureit
  W56H- Remove Missed call list plainlanddental 5 10,476 01-02-2019 12:47 PM
Last Post: complex1
  T19P E2 auto provision firmware. NI 1 4,363 10-08-2018 05:15 PM
Last Post: NI

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication