[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't de-register default base
Author Message
Nigutz Offline
Junior Member
**

Posts: 4
Joined: Nov 2014
Reputation: 0
Post: #5
RE: Can't de-register default base
(11-27-2014 08:37 PM)Yealink_Wilson Wrote:  Hi Nigutz,

1. Access to phone menu->Settings->Registration->De-reg. Handset->enter the PIN number, default is 0000. Choose the handset which you want to de-registration.
2. If you register one handset to more than one base, you can access to phone menu->Settings->Registration->Select base, choose the base you want to register.
For more information, please refer to the user guide of W52P.
Yealink_W52P_User_Guide_V73

thanks

Hello,

maybe I wan't clear, but It's not possible to deregister a base if this handset is not "connected" to the base.

To be more clear my problem is: the handset has in its config a pre registered base. I don't have in my hands this base (it's in an other office in an other continent). I can't deregister the handset without the base, all I got when trying to deregister is "Not in range".
The base I'm trying to register (in my office) is working properly with 2 other handsets.
It's impossible to register this handset with this base if I don't deregister the handset to the previous base.

So I need a way to "force" deregistration to the handset.

Thanks for your help
11-27-2014 09:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Can't de-register default base - Nigutz - 11-27-2014, 02:01 AM
RE: Can't de-register default base - CWR - 11-27-2014, 02:58 AM
RE: Can't de-register default base - Nigutz - 11-27-2014 09:50 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W56H with W52P Base dmvcomms 5 1,056 10-26-2022 03:04 PM
Last Post: poznaniak
  internal call between two base stations fails janus 1 5,553 01-07-2021 07:20 PM
Last Post: complex1
  Register Fail - Cisco Unified Communications Manager sirius 3 15,218 04-11-2018 06:44 AM
Last Post: Bilal
  W52P - Register Failed Patte 3 10,911 12-02-2017 09:54 AM
Last Post: complex1
  double base station proximity ipv6fill 2 8,668 03-21-2017 08:39 AM
Last Post: Kevin_Yealink
  New Handset Can't Register to Base SergioA 2 10,929 01-06-2017 06:20 PM
Last Post: SergioA
  Searching for Base aabramov 63 194,245 10-17-2016 10:43 AM
Last Post: Karl_Yealink
  Downgrading Base firmware to 25.73.0.27 from 25.73.0.40 bharat@metro 3 13,783 07-20-2016 08:53 PM
Last Post: complex1
  W52P Base default password under FW 26.73.0.11 ? voicewarellc 2 15,296 04-19-2016 07:21 AM
Last Post: VK2XXY
  Provision second W52H to existing base and 3cx vondie 10 47,142 02-26-2016 04:46 AM
Last Post: GreyFox

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication