T26 Park Button problem Asterisk v1.8

[rfrantik@rfcinc.com]

T26 Park Button problem Asterisk v1.8

From my research it seems that when using the DSS Key Type "Call Park" the T26 phone is doing a Blind Transfer during the park. We use 700 as our call park code.

If I do a Transfer - 700 manually I hear the system read the call park location back to me and the BLF button for Park 701 lights up. Basically it works fine.

If I press the DSS Call Park button (properly programmed with the 700 code) the call gets parked to an "unknown" location.

We run a Multi-Tenant version of Asterisk... so our parking lots are in context as such:

default-tenant1
default-tenant2
default-tenant3

After a little digging it appears that if we manually transfer the call, the call gets parked in default-tenant1 context (or the appropriate tenant to the phone).

If we use the DSS button and Call Park feature the call just gets parked to the "default" context.

It appears this issue has to do with the manner in which Asterisk v1.8 interprets the "blind" call park being done by the Yealink phone. Is there a way to make changes to the method being used by the Call Park DSS button?

Please Advise.