[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T21
Author Message
coco Offline
Super Moderator
******

Posts: 113
Joined: Aug 2014
Reputation: 0
Post: #2
RE: T21
Hello TaNTal,

Do you want to achieve that the phone will reboot after downloading the cfg file,right ?
If my understanding is right, then you can set below syntax in your common.cfg

auto_provision.reboot_force.enable=1
Description:
It enables or disables the IP phone to reboot after auto provisioning even though there is no specific configuration requiring reboot in configuration files.
0-Disabled
1-Enabled
The default value is 0.
Note: It works only for the current auto provisioning process. If you want the IP phone to reboot after every auto provisioning process, the parameter must be always contained in the configuration file and set to 1.
11-25-2014 09:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T21 - TaNTal - 11-24-2014, 10:32 PM
RE: T21 - Yealink_Coco - 11-25-2014 09:18 PM
RE: T21 - TaNTal - 11-27-2014, 02:53 PM
RE: T21 - Yealink_Coco - 12-08-2014, 08:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication