New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cannot get NTP to work
Author Message
bdgarcia Offline
Junior Member
**

Posts: 1
Joined: Nov 2014
Reputation: 0
Post: #1
Cannot get NTP to work
Hello,

I am unable to get NTP to work with my T46G and T48G phones. I have attached a screen shot from the T48G web config time & date settings section. I have attached the syslog (log level 6) from the phone, and I have attached the output from an NTP tester where I have tested 3 different NTP servers which are all working and accessible from the same subnet as the phones. In the log from the T48G I don't find any indications of the phone actually making an NTP request.

I am using the phones with 3CX Version 12
The firmware on the T48G(s) is 35.72.0.225
The firmware on the T46G(s) is 28.72.0.46 and 28.71.0.224


I am stumped so any help would be greatly appreciated.

Thx
Bryan


Attached File(s) Thumbnail(s)
       

.tar  syslog.tar (Size: 356 KB / Downloads: 1)
(This post was last modified: 11-16-2014 06:15 AM by bdgarcia.)
11-16-2014 06:10 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Cannot get NTP to work - bdgarcia - 11-16-2014 06:10 AM
RE: Cannot get NTP to work - James_Yealink - 11-17-2014, 04:22 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  BLF no work in Unify OpenScape Business marioruiz_2811 4 1,818 05-22-2019 02:52 PM
Last Post: turiatel
  cannot get forwarding to work p2xt 2 1,936 11-07-2017 10:54 AM
Last Post: p2xt
  VPN Offline allow phone to work Clair 1 1,940 08-04-2017 09:31 PM
Last Post: jolouis
  Action URL does not work danield 1 3,000 10-01-2016 12:57 AM
Last Post: Kevin_Yealink
  Action URL does not work danield 0 1,672 09-13-2016 03:12 PM
Last Post: danield
  Daylight Saving Time endTime don't work as expected amvalente 4 4,750 04-18-2016 08:26 PM
Last Post: grupocodesi
  Local DHCP doesnt work when OpenVPN is enabled davids@btni.co.uk 3 4,190 11-19-2015 10:22 AM
Last Post: LandonL
  Usernames and Passwords don't work tdhfox21 1 2,769 11-11-2015 06:30 AM
Last Post: rjdefusco
  Can't log in with password: "admin", Phone won't work ArjanOskam 1 4,738 03-04-2015 05:11 PM
Last Post: James_Yealink
  T46G - BLF doesn't work auvesy 1 4,138 08-27-2014 10:51 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication