firmware bug in 32.70.1.33 & 38.70.1.33

[lorn10]

Ok, after hours of working I build now a 100% clean M7 (v70+) template based provision file.

Unfortunately it still doesn't provise correctly, - it hangs at "Configuration updating..." message with firmware 32.70.1.33 & 38.70.1.33.

With firmware 32.70.0.185 it works perfectly. And, most important, - also the special European daylight-saving parameters are now correctly adopted with this new M7 template based provision file. This newer worked before.

y0000000000$suffix.cfg code (M7 based, for OSS PBX End Point Manager at FreePBX)

Code:

#!version:1.0.0.1
## the file header "#!version:1.0.0.1" can not be edited or deleted. ##


#
local_time.time_zone = {$timezone}
local_time.time_zone_name =
local_time.ntp_server1 = {$network_time_server}
local_time.ntp_server2 = pool.ntp.org
local_time.interval = 1000
local_time.summer_time = 1
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.time_format = 1
local_time.date_format = 5
local_time.dhcp_time = 0
local_time.manual_time_enable = 1


#
auto_provision.mode = 1
auto_provision.repeat.enable = 0
auto_provision.repeat.minutes = 1440
auto_provision.weekly.enable = 0
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 00:00
auto_provision.weekly.end_time = 00:00
auto_provision.server.url = tftp://{$server.ip.1}
auto_provision.dhcp_option.enable = 1


#
telnet.enable = 0


#
voice.cng = 0
voice.vad = 1
voice.side_tone = -30
voice.tone.country = {$tones_country}


#
distinctive_ring_tones.alert_info.1.text = interal
distinctive_ring_tones.alert_info.1.ringer = 2
distinctive_ring_tones.alert_info.2.text = external
distinctive_ring_tones.alert_info.2.ringer = 5


#
phone_setting.inter_digit_time = 4
phone_setting.flash_hook_timer = 1
phone_setting.lock = 0
phone_setting.phone_lock.unlock_pin = 10
phone_setting.phone_lock.lock_time_out = 10
phone_setting.ring_type = Busy.wav
phone_setting.active_backlight_level = 6
phone_setting.inactive_backlight_level = 0
phone_setting.backlight_time = 120
phone_setting.ring_for_tranfailed = Ring1.wav
phone_setting.logon_wizard = 0
phone_setting.predial_autodial = 0
phone_setting.is_deal180 = 1
phone_setting.dialnow_delay = {$dialnowdelay}
phone_setting.custom_softkey_enable = 0
phone_setting.theme = {$theme}
phone_setting.emergency.number = 000
phone_setting.sms_popup_enable = 1
phone_setting.common_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_power_led_flash_enable = 0
phone_setting.voice_volume = 5


#
dialplan_dialnow.url = tftp://{$server.ip.1}/dialnow.xml


#
security.user_password = admin:{$adminpw}


#
firmware.url = {$firmware_name}