firmware bug in 32.70.1.33 & 38.70.1.33

[lorn10]

(11-10-2014 03:49 PM)Yealink_Wilson Wrote:  Hi lorn10,

I have tested it in my side and it does work well.
So would you please reset the phone to factory then try again?
Access to web gui->Settings->Upgrade tab, click "Reset to Factory Setting" button to reset.

thanks

Hello Yealink_Wilson

Thanks for this information, but the problem is still present. After pushing "Autoprovision Now" button, phone hangs at "Configuration updating..." message. Provision function is NOT working, --> phone has still factory settings.

After downgrading to firmware 32.70.0.185, it works again.

Please note, - I use FreePBX Distro 5.211.65-20 with latest OSS PBX End Point Manager 2.11.7. Probably my provision file has wrong syntax? Is firmware 32.70.1.33 still M7 template based?

My full y0000000000$suffix.cfg config has following commands:

Code:

[ cfg:/phone/config/system.ini,reboot=1 ]
local_time.manual_time_enable = 1
local_time.ntp_server1 = {$network_time_server}
local_time.ntp_server2 = pool.ntp.org
local_time.interval = 1000
local_time.time_zone = {$timezone}

local_time.summer_time = 1
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.time_format = 1
local_time.date_format = 5

auto_provision.mode = 1
auto_provision.repeat.enable = 0
auto_provision.repeat.minutes = 1440
auto_provision.weekly.enable = 0
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 00:00
auto_provision.weekly.end_time = 00:00
AutoProvision.strServerURL = tftp://{$server.ip.1}

telnet.telnet_enable = 0

[ cfg:/phone/config/system.ini,reboot=1]
Profile.CNG = 0
Profile.VAD = 1
Profile.Echo = 1
Profile.SIDE_TONE = -30

[ cfg:/phone/config/user.ini,reboot=1 ]
WatchDog.Time = 10
vpm_tone_Country.Country = {$tones_country}

AlertInfo0.Text = interal
AlertInfo0.Ringer = 2

AlertInfo1.Text = external
AlertInfo1.Ringer = 5

Emergency.Num = 000

PhoneSetting.BacklightTime = 120
PhoneSetting.DialNowDelay = {$dialnowdelay}
PhoneSetting.BackGrounds = {$uselogo}
PhoneSetting.BackLight = 6
PhoneSetting.UnusedBackLight = 0
PhoneSetting.ScreensaverTime = {$screensaverdelay}
PhoneSetting.Theme = {$theme}
PhoneSetting.Voicevolume = 5
PhoneSetting.Lock = 0

[ bin:/phone/config/DialNow.xml,reboot=0 ]
url=tftp://{$server.ip.1}/dialnow.xml

[ psw:/phone/config/.htpasswd ]
admin = {$adminpw}

[ rom:Firmware ]
url = {$firmware_name}