New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto-Provisioning not updating/replacing settings.
Author Message
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #11
RE: Auto-Provisioning not updating/replacing settings.
Just for information, - I figured it out! (After hours of testing..)

The new provision file is now 100% M7 template compatible. It seems that some parameters in the previous provision file where outdated and incompatible. These legacy parameter probably cause errors with firmware newer then v70+.

Note, this T32G & T38G config here is designed for Europe, - it has 24 clock & date format and (Central) European daylight saving parameters.

Update 13.05.2015
--> actual T3xG template for OSS End Point Manager at FreePBX

Code:
#!version:1.0.0.1
## the file header "#!version:1.0.0.1" can not be edited or deleted. ##


#
local_time.time_zone = {$timezone}
local_time.time_zone_name =
local_time.ntp_server1 = {$network_time_server}
local_time.ntp_server2 = pool.ntp.org
local_time.interval = 1000
local_time.summer_time = 1
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.time_format = 1
local_time.date_format = 5
local_time.dhcp_time = 0
local_time.manual_time_enable = 1


#
auto_provision.mode = 1
auto_provision.repeat.enable = 0
auto_provision.repeat.minutes = 1440
auto_provision.weekly.enable = 0
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 00:00
auto_provision.weekly.end_time = 00:00
auto_provision.server.url = tftp://{$server.ip.1}
auto_provision.dhcp_option.enable = 1


#
telnet.enable = 0


#
voice.cng = 0
voice.vad = 1
voice.side_tone = -30
voice.tone.country = {$tones_country}


#
distinctive_ring_tones.alert_info.1.text = interal
distinctive_ring_tones.alert_info.1.ringer = 2
distinctive_ring_tones.alert_info.2.text = external
distinctive_ring_tones.alert_info.2.ringer = 5


#
phone_setting.inter_digit_time = 4
phone_setting.flash_hook_timer = 1
phone_setting.lock = 0
phone_setting.phone_lock.unlock_pin = 10
phone_setting.phone_lock.lock_time_out = 10
phone_setting.ring_type = Busy.wav
phone_setting.active_backlight_level = 6
phone_setting.inactive_backlight_level = 0
phone_setting.backlight_time = 120
phone_setting.ring_for_tranfailed = Ring1.wav
phone_setting.logon_wizard = 0
phone_setting.predial_autodial = 0
phone_setting.is_deal180 = 1
phone_setting.dialnow_delay = {$dialnowdelay}
phone_setting.custom_softkey_enable = 0
phone_setting.theme = {$theme}
phone_setting.emergency.number = 000
phone_setting.sms_popup_enable = 1
phone_setting.common_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_power_led_flash_enable = 0
phone_setting.voice_volume = 5


#
dialplan_dialnow.url = tftp://{$server.ip.1}/dialnow.xml


#
security.user_password = admin:{$adminpw}


#
firmware.url = {$firmware_name}
(This post was last modified: 05-14-2015 02:20 AM by lorn10.)
11-24-2014 02:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Auto-Provisioning not updating/replacing settings. - lorn10 - 11-24-2014 02:28 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 1,385 07-02-2019 03:04 PM
Last Post: Fraukas2
Lightbulb Auto provision firmware ... Yuriy Y. 1 669 04-26-2019 05:40 AM
Last Post: Yuriy Y.
  Provisioning Multiple Wallpapers BryanLee 1 888 04-24-2019 08:39 PM
Last Post: joew
  T23G won't donwload y000000000044.cfg from Provisioning Server rsardinha 3 766 04-12-2019 06:13 PM
Last Post: rsardinha
  T22P always auto restart jamess2007 2 825 03-13-2019 11:49 AM
Last Post: Langveldt
  Firewall Settings for Auto Provisioning ChristophWHAT 2 1,210 02-04-2019 12:47 PM
Last Post: ChristophWHAT
  Multiple provisioning servers Integra Business Solutions Inc. 4 1,673 10-26-2018 06:49 PM
Last Post: Integra Business Solutions Inc.
  Auto Provisioning Hangs Rus 1 1,134 10-17-2018 11:06 AM
Last Post: Rus
  Auto provisioning file names shane.caznet 1 1,400 10-12-2018 02:56 PM
Last Post: jolouis
  Auto-Provision Firmware Rus 0 1,030 08-24-2018 11:07 AM
Last Post: Rus

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication