Auto-Provisioning not updating/replacing settings.

[lorn10]

Quote:Is it just those settings that are not updating? I fixed my problem by manually adding an entry for the auto-provision server's IP.

It seems that when the phones have default settings they will auto-provision based on the server you set with the DHCP option... but once they have been configured through that they ignore subsequent configuration changes unless they know the address of the server to auto-provision from [despite it being available to them through DHCP], so you must manually specify it in the original config or add it through the webUI and force it to provision.

Thanks for your fast answer. Yes, these are the changes which are not updated to the phones. My full y0000000000$suffix.cfg config file looks very different from yours. Where I should add your two new entries?

Code:

[ cfg:/phone/config/system.ini,reboot=1 ]
LocalTime.TimeZone = {$timezone}
LocalTime.TimeServer1 = {$network_time_server}
LocalTime.TimeServer2 = pool.ntp.org
LocalTime.Interval = 1000
LocalTime.SummerTime = 1
LocalTime.dstTimeType = 1
LocalTime.StartTime = 3/5/7/1
LocalTime.EndTime = 10/5/7/2
LocalTime.OffsetTime = 60
LocalTime.TimeFormat = 1
LocalTime.DateFormat = 5

AutoProvision.bEnablePowerOn = 1
AutoProvision.bEnableWeekly = 0
AutoProvision.bEnableDHCPOption = 1
AutoProvision.listSystemOptions = 66,43
AutoProvision.strServerURL = tftp://{$server.ip.1}

telnet.telnet_enable = 0

[ cfg:/phone/config/system.ini,reboot=1]
Profile.CNG = 0
Profile.VAD = 1
Profile.Echo = 1
Profile.SIDE_TONE = -30

[ cfg:/phone/config/user.ini,reboot=1 ]
WatchDog.Time = 10
vpm_tone_Country.Country = {$tones_country}

AlertInfo0.Text = interal
AlertInfo0.Ringer = 2

AlertInfo1.Text = external
AlertInfo1.Ringer = 5

Emergency.Num = 000

PhoneSetting.BacklightTime = 120
PhoneSetting.DialNowDelay = {$dialnowdelay}
PhoneSetting.BackGrounds = {$uselogo}
PhoneSetting.BackLight = 6
PhoneSetting.UnusedBackLight = 0
PhoneSetting.ScreensaverTime = {$screensaverdelay}
PhoneSetting.Theme = {$theme}
PhoneSetting.Voicevolume = 5
PhoneSetting.Lock = 0

[ bin:/phone/config/DialNow.xml,reboot=0 ]
url=tftp://{$server.ip.1}/dialnow.xml

[ psw:/phone/config/.htpasswd ]
admin = {$adminpw}

[ rom:Firmware ]
url = {$firmware_name}

Supplement: Parameter auto_provision.server.url semms to be for firmware V71 and above, - not for V70 based like T38G & T32G are. Does this really works for you at T38G? In my (old) config, parameter AutoProvision.strServerURL seems the correct one. It works for firmware 32.70.0.185 & 38.70.0.185. However, daylight saving parameters are still completely ignored.