[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto-Provisioning not updating/replacing settings.
Author Message
kkj Offline
Junior Member
**

Posts: 10
Joined: Nov 2014
Reputation: 0
Post: #1
Question Auto-Provisioning not updating/replacing settings.
The model of the phone I'm working with is the SIP-T38.

Phones that have previously been configured through auto-provision are not updating settings that have changed in an updated version of the global configuration auto-provision file.

Here is an example of the sequence of events:
  1. y000000000038.cfg (version 1) is uploaded to TFTP server. It contains a configuration for the time zone.
  2. A phone with factory default settings is connected to the network and powered on. It successfully auto-provisions.
  3. A change is made to the y000000000038.cfg file (version 2) and re-uploaded, replacing the original. It contains a different setting for the time zone than version 1 of the file.
  4. I access the phone's web UI and manually trigger auto-provisioning.
  5. The phone's time zone setting does not change. It is still the setting found in version 1 of the y000000000038.cfg file.
My question is this: Why doesn't the phone replace the settings found in the new version of the config file?

The only way I am able to get around this (aside from manually configuring the phone) is to reset it to factory defaults, at which point it auto-provisions and collects the most recent version of the configuration.

I'm about to deploy a large number of phones, but in the near future (after the phones have been deployed) I will need to update the global config and would like to avoid having to reset their settings individually.

Thanks in advance.
11-04-2014 05:05 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Auto-Provisioning not updating/replacing settings. - kkj - 11-04-2014 05:05 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Auto Provision Wall Paper Stopped Working TRP Tech 5 9,149 02-19-2024 12:02 AM
Last Post: jamesalan
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 2 1,185 02-05-2024 12:49 PM
Last Post: bekean
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 1,316 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 2,682 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 5,673 04-12-2023 05:32 PM
Last Post: aaronmedina
  Remote Phonebook settings lost.. bluetba 0 1,183 02-23-2023 07:52 PM
Last Post: bluetba
  account.X provisioning vieri 7 4,734 02-10-2023 07:02 PM
Last Post: vieri
  Yealink T54W Auto Provision not working h.cmc 1 3,541 12-09-2022 08:31 PM
Last Post: complex1
  T46U Not Contacting Provisioning Server 88fingerslukee 0 2,104 09-06-2022 11:43 PM
Last Post: 88fingerslukee
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 4,787 08-30-2022 06:28 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication