(10-16-2014 10:34 PM)condor Wrote: The time zone of Uruguay is -3, thats right. For example i use the time zone of Buenos Aires, but the DST doesn't change automatic, i must change it manually (see attachment).
I already tried -3 BRazil (not DST) and -3 BRazil (DST) but not work.
Thanks.
(10-16-2014 08:34 PM)Yealink_Jim Wrote: Hi,
Does the time zone of Uruguay is -3?
If yes, you can try to pick one -3 time zone in the Yealink phone which won't affect the correct time and date displayed. If it can't solve this issue, please contact me freely.
I suggest that you can set up via Auto Provisioning, given below is the configuration parameters
---------------------------------------
#!version:1.0.0.1
local_time.time_zone =-3
local_time.time_zone_name = Brazil(DST)
##It enables or disables daylight saving time (DST) feature.
##0-Disabled,1-Enabled,2-Automatic.
##The default value is 2.
local_time.summer_time =
##It configures the way DST works when DST feature is enabled.
##0-DST By Date ,1-DST By Week.
##The default value is 0.
local_time.dst_time_type =
##It configures the start time of the DST.
##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week)
##The default value is 1/1/0.
local_time.start_time =
##It configures the end time of the DST.
##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week)
##The default value is 12/31/23.
local_time.end_time =
##It configures the offset time (in minutes).
##The default value is blank.Integer from -300 to 300
local_time.offset_time =
---------------------------------------
About the time zone name you can refer to below picture:
You can refer to below Auto Provisioning guide to get more information:
http://www.yealink.com/Upload/T2X/201421...V72_25.pdf
If the time zone of the Uruguay isn't -3, please let me know the correct time zone
Hope this helps!
Hi
You can configure the DST via Auto provision, given below is the configuration parameters:
------------------------------------------------------------
#!version:1.0.0.1
##It enables or disables daylight saving time (DST) feature.
##0-Disabled,1-Enabled,2-Automatic.
##The default value is 2.
local_time.summer_time = 1
##It configures the way DST works when DST feature is enabled.
##0-DST By Date ,1-DST By Week.
##The default value is 0.
local_time.dst_time_type = 0
##It configures the start time of the DST.
##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week)
##The default value is 1/1/0.
local_time.start_time =10/05/2
##It configures the end time of the DST.
##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week)
##The default value is 12/31/23.
local_time.end_time =03/09/2
##It configures the offset time (in minutes).
##The default value is blank.Integer from -300 to 300
local_time.offset_time =60
-------------------------------------------------------------------
You can refer to below Auto Provisioning guide to get more information:
http://www.yealink.com/Upload/T2X/201421...V72_25.pdf