New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Analog input to multicast paging
Author Message
jolouis Offline
Moderator
*****

Posts: 315
Joined: Oct 2013
Reputation: 5
Post: #3
RE: Analog input to multicast paging
We just developed a device that does exactly what you describe for a school board customer of ours. The problem they had was that they needed to keep their existing analog paging infrastructure, but wanted to add IP Multicast paging to the mix to allow them to gradually migrate away from speakers in the classrooms (and just leave speakers in the hallways, with phones in the room).

If you are talking strictly for class change/tones then there are probably more straight forward options. i.e. something like BellCommander:
http://www.acrovista.com/bellcommander/sip-version.html
Which is a program that lets you schedule the tones and have them sent from a PC to the SIP phones directly. I've never used it and have no idea at costing, but it might be reasonable if you have a computer lying around on site to install it onto.

For our customer because they wanted more than just tones (the existing analog system is used for paging, tones, music playback, emergency announcements, etc) an interface made more sense than software, so the cost is justified (our unit is approx. $300.00)
10-11-2014 02:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Analog input to multicast paging - rlsabin - 10-09-2014, 03:33 AM
RE: Analog input to multicast paging - jolouis - 10-11-2014 02:09 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Format of Multicast RTP stream srcurtis 6 8,990 04-19-2019 02:25 AM
Last Post: Helia_Dar
  Paging Volume ITSteve 3 2,164 05-10-2018 02:00 AM
Last Post: Kevin_Yealink
  Multicast to PC through PC port agle 1 2,052 09-30-2017 07:45 AM
Last Post: Samuel_Yealink
  Multicast to PC through PC port Dennis_1 1 2,017 09-27-2017 01:59 AM
Last Post: Samuel_Yealink
  Paging Tone ChTanzer 1 1,838 09-21-2017 09:40 AM
Last Post: Karl_Yealink
  Multicast paging tone sunstatetech 3 3,725 05-04-2017 07:23 PM
Last Post: GIWM
  Outgoing Calls From the Analog Pluged Line Diorr 5 6,827 04-18-2016 02:56 PM
Last Post: jackstevens
  Multicast T23 kriner 3 3,026 04-14-2016 04:57 AM
Last Post: kriner
  multicast paging T-19 jpinder70 3 4,526 03-16-2016 04:08 AM
Last Post: abe_b
  Multicast without PBX? fonewiz 1 2,255 01-08-2016 05:36 AM
Last Post: Karl_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication