[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Caller id presentation info on BLF visual display
Author Message
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #4
RE: Caller id presentation info on BLF visual display
(09-26-2016 06:33 PM)Chris Barron Wrote:  
(09-23-2016 09:27 AM)Yealink_kevin Wrote:  Dear Chris

This is Kevin from Yealink support team, nice to know you.

For this issue, We replace the phone as character, such as T46:A; T41:B; caller phone:C.
Then let us check again with the sutiation:
B set BLF to monitor A, then C call A, B phone will display A<-C;
A set BLF to monitor B, then C call B, A just display B<-B, right?

Let me know if any misunderstanding. Also, please send the pacp,syslog,config.bin files to me , then i can do more trouleshooting. For how to get them, please refer to the FAQ:http://support.yealink.com/faq/faqInfo?id=311
NOTE:please reproduce the issue and send files to me. You should reproduce the 2 sutiation and send all fies to me, then i can do a comparison.



BR
Kevin

HI Kevin,
thanks for the quick response - yes the logic you describe is how i've set it up. Strangely, since i first tested on thursday the situation has changed. On the T46 its no longer showing the inbound number.

I've attached pcap traces from the phone and pcap traces from a local network capture via a bridge so i see both directions. The detail in the SIP notify shows only the extension number not the calling party's number. I tried changing the CID settings and it made no difference, the calling party did not appear in the notify messages however I set it.

Am I right in thinking that the phone presents the called party's name by referencing the extension number in the blf key and pulling back the name rather than relying on it being sent by the server. Because we are seeing the called extension number appearing in the Notify message for the called and call party then its showing Barry<<Barry.
I;ve got a tech case running with the third line support guys on the server side so I will update you.

Also I think I may have missed the syslog files - will end those later - chris

Dear Chris

Thanks for the files. I check the files and also test in my side. Here is reply to you.
1.please see the test result in my side, please kindly see the pacp in the link: http://ftp.yealink.com/?ShareToken=EDABD...0F943A69A9
Please filter 'sip and ip.addr==10.2.10.13' in the wireshark.
100 monitor 101, then use 102 to call 101, and 100 will display 101-<102. It is correct.
The server will send NOTIFY packet to the 100 with xml. In the xml, there is local identity and remote identity, then 100 will display 101-< 102 on the base of local and remote identity.

2.I check the file of you.
134 monitor 939, then use 308 to call 939, the server send a NOTIFY packet with xml. in the xml, we can see that remote identity and local identity are the same.

So please ask your server provider for help to change it on the server side.

Let me know if any udpate.

Due to the national holiday is upcoming, our office will be temporarily out of duty from Oct 1st to Oct 7th.

BR
Kevin
09-30-2016 11:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Caller id presentation info on BLF visual display - Kevin_Yealink - 09-30-2016 11:59 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to show caller Phone Number when call is forwarded gijoe 0 506 05-31-2022 07:40 PM
Last Post: gijoe
  T48s setting outbound caller ID thunderzhao 1 2,762 09-10-2021 04:08 PM
Last Post: complex1
Bug Visual Alert for BLF Pickup - limit to group only Maciejp 2 2,695 08-11-2021 01:40 PM
Last Post: Maciejp
  T48S Display Language change (Step by Step) schost 0 2,457 03-04-2021 04:02 PM
Last Post: schost
  Call Park + Audible / Visual Alerts bdm 0 2,156 02-23-2021 04:24 AM
Last Post: bdm
  Call-Info sip header for T46G sidjf3zhdu 9 22,403 02-22-2021 04:06 PM
Last Post: jiansong
  Caller image (avatar) not shown StefanR 1 3,107 01-01-2021 05:45 PM
Last Post: mariovoip
  Caller ID on attended transfer tcarter@teklinks.com 11 29,277 10-27-2020 01:29 AM
Last Post: sentinelace
Question Switch account on T48S - Outgoing caller ID remains at default account puregin 0 2,443 09-30-2020 09:52 AM
Last Post: puregin
  caller ID source --> display permanently wouternotebaert 1 3,340 09-07-2020 02:47 PM
Last Post: David_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication